ON Semiconductor OPTOLOGIC Photosensor
The QSE2x family of OPTOLOGIC ICs are bipolar silicon sensors featuring a Schmitt trigger for enhanced noise immunity and pulse shaping. They integrate a photodiode, linear amplifier, voltage regulator, and Schmitt trigger, offering various output options. These devices are suitable for TTL/LSTTL interface applications and can drive up to ten TTL loads across a supply voltage range of 4.5 to 16.0 Volts. Each device is marked with a color stripe for easy identification.
Product Attributes
- Brand: ON Semiconductor (formerly Fairchild Semiconductor)
- Product Line: OPTOLOGIC
- Material: Plastic Silicon
- Package Type: Sidelooker
- Package Color: Black Epoxy
- Features: Daylight filter, High sensitivity, Medium wide reception angle (50)
Technical Specifications
| Part Number | Output Type | Color Code | Input/Output Table | Absolute Maximum Ratings (TA = 25C) | Electrical Characteristics (TA = -40C to +85C, VCC = 4.5V to 5.5V) |
| QSE256 | Totem-Pole, buffer output | Red | On: HIGH, Off: LOW | - TOPR: -40 to +85 C
- TSTG: -40 to +100 C
- TSOL-I: 240 for 5 sec C
- TSOL-F: 260 for 10 sec C
- IO: 50 mA
- VCC: 4.0 to 16 V
- VO: 35 V
- PD: 100 mW
| - Ee(+) Positive Going Threshold Irradiance: 0.025 (Min), 0.250 (Max) mW/cm
- Ee(+)/Ee(-) Hysteresis Ratio: 1.10 (Typ), 2.00 (Max)
- ICC Supply Current: 5.0 mA (Typ)
- VOH High Level Output Voltage: 2.4 V (Typ)
- VOL Low Level Output Voltage: 0.40 V (Typ)
- tR, tF Output Rise, Fall Times: 70 nS (Typ)
- tPHL, tPLH Propagation Delay: 6.0 S (Typ)
|
| QSE257 | Totem-Pole, inverter output | Yellow | On: LOW, Off: HIGH | - TOPR: -40 to +85 C
- TSTG: -40 to +100 C
- TSOL-I: 240 for 5 sec C
- TSOL-F: 260 for 10 sec C
- IO: 50 mA
- VCC: 4.0 to 16 V
- VO: 35 V
- PD: 100 mW
| - Ee(+) Positive Going Threshold Irradiance: 0.025 (Min), 0.250 (Max) mW/cm
- Ee(+)/Ee(-) Hysteresis Ratio: 1.10 (Typ), 2.00 (Max)
- ICC Supply Current: 5.0 mA (Typ)
- VOH High Level Output Voltage: 2.4 V (Typ)
- VOL Low Level Output Voltage: 0.40 V (Typ)
- tR, tF Output Rise, Fall Times: 70 nS (Typ)
- tPHL, tPLH Propagation Delay: 6.0 S (Typ)
|
| QSE258 | Open-collector, buffer output | Green | On: HIGH, Off: LOW | - TOPR: -40 to +85 C
- TSTG: -40 to +100 C
- TSOL-I: 240 for 5 sec C
- TSOL-F: 260 for 10 sec C
- IO: 50 mA
- VCC: 4.0 to 16 V
- VO: 35 V
- PD: 100 mW
| - Ee(+) Positive Going Threshold Irradiance: 0.025 (Min), 0.250 (Max) mW/cm
- Ee(+)/Ee(-) Hysteresis Ratio: 1.10 (Typ), 2.00 (Max)
- ICC Supply Current: 5.0 mA (Typ)
- IOH High Level Output Current: 100 A (Typ)
- VOL Low Level Output Voltage: 0.40 V (Typ)
- tR, tF Output Rise, Fall Times: 100 nS (Typ)
- tPHL, tPLH Propagation Delay: 6.0 S (Typ)
|
| QSE259 | Open-collector, inverter output | Blue | On: LOW, Off: HIGH | - TOPR: -40 to +85 C
- TSTG: -40 to +100 C
- TSOL-I: 240 for 5 sec C
- TSOL-F: 260 for 10 sec C
- IO: 50 mA
- VCC: 4.0 to 16 V
- VO: 35 V
- PD: 100 mW
| - Ee(+) Positive Going Threshold Irradiance: 0.025 (Min), 0.250 (Max) mW/cm
- Ee(+)/Ee(-) Hysteresis Ratio: 1.10 (Typ), 2.00 (Max)
- ICC Supply Current: 5.0 mA (Typ)
- IOH High Level Output Current: 100 A (Typ)
- VOL Low Level Output Voltage: 0.40 V (Typ)
- tR, tF Output Rise, Fall Times: 100 nS (Typ)
- tPHL, tPLH Propagation Delay: 6.0 S (Typ)
|
2411272222_onsemi-QSE257_C898423.pdf