Specifications
Frequency - Center :
38kHz
Transmission Distance :
30m
Viewing Angle :
75°
Operating Temperature :
-25℃~+85℃
Current - Supply :
350uA
Voltage - Supply :
2.5V~5.5V
Description :
38kHz 30m 75° 350uA 2.5V~5.5V SMD-4P,6.8x3mm Photo Detectors - Remote Receiver RoHS
Mfr. Part # :
TSOP75438WTT
Model Number :
TSOP75438WTT
Package :
SMD-4P,6.8x3mm
Description

Product Overview

The TSOP75...W series are miniaturized SMD IR receiver modules designed for infrared remote control systems. These modules integrate two PIN diodes and a preamplifier on a leadframe, with an epoxy package containing an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. The TSOP754..W series is optimized to suppress spurious pulses from energy-saving lamps like CFLs, though its AGC4 may suppress some data signals. The TSOP752..W series is primarily for compatibility with older AGC2 designs, while new designs should prefer the TSOP754..W series with the newer AGC4. These components are not qualified for automotive specifications.

Product Attributes

  • Brand: Vishay Semiconductors
  • Package Type: SMD
  • Mounting: SMD
  • View Capability: Side or top view
  • Profile: Low profile 2.35 mm
  • Material Compliance: Refer to www.vishay.com/doc?99912

Technical Specifications

Part NumberAGC TypeCarrier FrequencyApplicationPinningDimensions (mm)
TSOP75230WAGC2 (Legacy)30 kHzRemote control1, 4 = GND, 2 = VS, 3 = OUT6.8 W x 3.0 H x 2.35 D
TSOP75430WAGC4 (Recommended)30 kHzRemote control1, 4 = GND, 2 = VS, 3 = OUT6.8 W x 3.0 H x 2.35 D
TSOP75233WAGC2 (Legacy)33 kHzRemote control1, 4 = GND, 2 = VS, 3 = OUT6.8 W x 3.0 H x 2.35 D
TSOP75433WAGC4 (Recommended)33 kHzRemote control1, 4 = GND, 2 = VS, 3 = OUT6.8 W x 3.0 H x 2.35 D
TSOP75236WAGC2 (Legacy)36 kHzRemote control1, 4 = GND, 2 = VS, 3 = OUT6.8 W x 3.0 H x 2.35 D
TSOP75436WAGC4 (Recommended)36 kHzRemote control1, 4 = GND, 2 = VS, 3 = OUT6.8 W x 3.0 H x 2.35 D
TSOP75238WAGC2 (Legacy)38 kHzRemote control1, 4 = GND, 2 = VS, 3 = OUT6.8 W x 3.0 H x 2.35 D
TSOP75438WAGC4 (Recommended)38 kHzRemote control1, 4 = GND, 2 = VS, 3 = OUT6.8 W x 3.0 H x 2.35 D
TSOP75240WAGC2 (Legacy)40 kHzRemote control1, 4 = GND, 2 = VS, 3 = OUT6.8 W x 3.0 H x 2.35 D
TSOP75440WAGC4 (Recommended)40 kHzRemote control1, 4 = GND, 2 = VS, 3 = OUT6.8 W x 3.0 H x 2.35 D
TSOP75256WAGC2 (Legacy)56 kHzRemote control1, 4 = GND, 2 = VS, 3 = OUT6.8 W x 3.0 H x 2.35 D
TSOP75456WAGC4 (Recommended)56 kHzRemote control1, 4 = GND, 2 = VS, 3 = OUT6.8 W x 3.0 H x 2.35 D
ParameterSymbolMin.Typ.Max.UnitTest Condition
Supply voltageVS2.5-5.5VTamb = 25 C, unless otherwise specified
Supply currentISD-0.270.45mAEv = 0, VS = 3.3 V
Supply currentISH--0.45mAEv = 40 klx, sunlight
Transmission distanced-16-mEv = 0, test signal see Fig. 1, IR diode TSAL6200, IF = 50 mA
Output voltage lowVOSL--100mVIOSL = 0.5 mA, Ee = 0.7 mW/m2, test signal see Fig. 1
Minimum irradianceEe min.-0.250.5mW/m2Pulse width tolerance: tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1
Maximum irradianceEe max.30--W/m2tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1
Directivity1/2- 75--
Power consumptionPtot--10mWTamb 85 C

2411272317_VISHAY-TSOP75438WTT_C7074088.pdf

Send your message to this supplier
Send Now

SMD IR Receiver Module VISHAY TSOP75438WTT Optimized for Energy Saving Lamp Interference Suppression

Ask Latest Price
Frequency - Center :
38kHz
Transmission Distance :
30m
Viewing Angle :
75°
Operating Temperature :
-25℃~+85℃
Current - Supply :
350uA
Voltage - Supply :
2.5V~5.5V
Contact Supplier
SMD IR Receiver Module VISHAY TSOP75438WTT Optimized for Energy Saving Lamp Interference Suppression

Changsha Purple Horn E-Commerce Co., Ltd.

Verified Supplier
1 Years
hunan, changsha
Since 2009
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer
Employee Number :
300~500
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement