MachineU > China Products > Consumer Electronic
CO2 Sensor Amphenol T3032-2-100K-24-P NDIR Technology IP67 Rated for Harsh Environment Applications
CO2 Sensor Amphenol T3032-2-100K-24-P NDIR Technology IP67 Rated for Harsh Environment Applications
Specifications
Operating Temperature :
0℃~+50℃
Description :
Gas Sensor RoHS
Mfr. Part # :
T3032-2-100K-24-P
Model Number :
T3032-2-100K-24-P
Description

T3030 Series CO2 Sensors for Harsh Environments with Analog Outputs

Product Overview

The Amphenol Advanced Sensors Telaire T3030 Series is a range of Carbon Dioxide (CO2) Sensors specifically engineered for measuring CO2 in harsh or difficult environments. These accurate CO2 transmitters are designed for HVAC control applications and offer easy mounting with two external tabs. Built to withstand demanding conditions, they are rated up to IP67 (build dependent) and are available with optional potting for enhanced protection. The sensors utilize Non-Dispersive Infrared (NDIR) measuring technology and are factory-calibrated, offering accuracy for a 10-year life and an extended operating temperature range. Applications include incubators, buses, refrigerators, subway stations, railway carriages, and agricultural settings like glass houses, mushroom sheds, and animal sheds.

Product Attributes

  • Brand: Amphenol Advanced Sensors Telaire
  • Sensing Method: Non-Dispersive Infrared (NDIR), single or dual wavelength
  • Ingress Protection: Up to IP67 (dust tight and immersion to 1m)
  • Flammability Classification: To UL94 5VA (dependent upon build)
  • Calibration Guarantee: Lifetime for single wavelength, two years for dual wavelength
  • ABC Logic Self Calibration: Patented system for single wavelength sensors

Technical Specifications

Specification Details
Product Series T3030 Series
Mounting Easy mount with 2 external tabs
Potting Option Available
Calibrated Ranges Available up to 20% CO2 concentration (See Ordering Information for specific ranges)
Output Options Analog (0-5V, 0-10V, 4-20mA), Digital (Modbus, UART)
Power Supply Requirements 15 15 VDC 10%, 24 - 18-30 VAC RMS, 50/60 Hz, or 18 to 42 VDC, polarity protected
Power Consumption Typical 0.7 W at nominal voltage of 24V AC RMS
Resolution Minimum 10bit or analog equivalent
Accuracy (Single Wavelength, 0~2,000 ppm example) 400-1250 ppm: 30 ppm or 3% of reading (whichever is greater)*,**
1250-2000 ppm: 5% of reading + 30ppm *, **
Accuracy (Dual Wavelength, 0~2,000 ppm example) 75 ppm or 10% of reading (whichever is greater)
Accuracy (Dual Wavelength, 0~200,000 ppm example) 5% of reading or 0.3 vol% CO2 (whichever is larger) at 0 - 20 vol% CO2 and 0C to +25C
At 25C to 50C: additional 0.1% of reading or 0.01 vol% CO2 (whichever is larger) per degree C.
Temperature Dependence 0.2% FS / C
Response Time (tau, 63%) < 200 sec
Aging (Dual Wavelength Only) +/- 5% of reading annual drift. Less than +/- 25% of reading within product life time.
Recommended Recalibration Interval Single Wavelength No calibration required
Dual Wavelength - 1 year
Working Temperature 0 to +50C (measures within tolerance)
Operation Temperature (Sensor Is Powered) -30 to +50C
Storage Temperature -40 to +70C
Minimum Lifetime 10 years or 30,000 operating hours
RH Range 0% to 99% RH (non-condensing)
Atmospheric Conditions Tested Marine, salt mist and particles present; O2 level 0-21 vol%; 0 to 100% RH; Ammonium max 200mg/m3; SO2 max 0.5 vol%; Ethylene max 500ppm vol; Ozone. (Note: Not all models are equally capable; discuss application with Telaire)
Wiring (Power Input & Analog Output) Wire 1: +/~ 24VCC/24VAC
Wire 2: Output (4~20mA or 0-10Vdc)
Wire 3: -/~ 24VCC/24VAC
Wire 4: Ground
Wiring (Calibration Cable - Deutch Connector) Connection 1: + 5 VDC
Connection 2: Ground
Connection 3: TX UART
Connection 4: RX UART
(Note: Only one connection should be powered at any one time. Power input must be off when calibration cable is connected and powered.)
Example Models T3031-2-2K-24-P (Dual Channel, 0-2000 PPM, 0-10 VDC o/p, Potted)
T3032-2-5K-24-P (Dual Channel, 0-5000 PPM, 4-20 mA o/p, Potted)
T3031-1R-3K-24-400 (Single Channel, 0-3000 PPM, 0-10 VDC o/p, 400mm cable (EN45545))
Other Configurations Available. Please contact Telaire. Lesser ingress protection, higher fire and smoke ratings, different outputs, and different calibration levels are possible derivatives.

2410311740_Amphenol-T3032-2-100K-24-P_C5791785.pdf
Send your message to this supplier
Send Now

CO2 Sensor Amphenol T3032-2-100K-24-P NDIR Technology IP67 Rated for Harsh Environment Applications

Ask Latest Price
Product Detail
Operating Temperature :
0℃~+50℃
Description :
Gas Sensor RoHS
Mfr. Part # :
T3032-2-100K-24-P
Model Number :
T3032-2-100K-24-P
Contact Supplier
CO2 Sensor Amphenol T3032-2-100K-24-P NDIR Technology IP67 Rated for Harsh Environment Applications

Changsha Purple Horn E-Commerce Co., Ltd.

Verified Supplier
1 Years
hunan, changsha
Since 2009
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer
Main Products :
Analog and Digital Output, Pressure Sensors, Transducers, Sensor, Transducer Amplifiers
Employee Number :
300~500
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Gas Sensor
MachineU China Products Consumer Electronic
Contact Supplier
Submit Requirement