The MIC384 is a versatile digital thermal supervisor designed to measure local and two remote temperatures. It features a 2-wire SMBus-compatible interface, programmable thermostat settings, an open-drain interrupt output, and fault queues to prevent nuisance tripping. Its low power shutdown mode and failsafe response to diode faults make it suitable for demanding thermal management applications.
| Parameter | Symbol | Min. | Typ. | Max. | Units | Conditions |
| Power Supply Voltage | VDD | 2.7 | 5.5 | V | Operating | |
| Supply Current (Normal Mode) | IDD | 350 | 750 | A | /INT, open, A0 = VDD or GND, CLK = DATA = high | |
| Supply Current (Shutdown Mode, CLK=100kHz) | IDD | 3 | A | /INT, open, A0 = VDD or GND | ||
| Supply Current (Shutdown Mode, CLK=DATA=high) | IDD | 1 | 10 | A | /INT, open, A0 = VDD or GND | |
| Power-on Reset Time | tPOR | 200 | s | VDD > VPOR | ||
| Power-on Reset Voltage | VPOR | 2.0 | 2.7 | V | All registers reset to default values; A/D conversions initiated | |
| Power-on Reset Hysteresis Voltage | VHYST | 250 | mV | |||
| Local Temperature Accuracy | 1 | 2 | C | 0C TA +100C, /INT open, 3V VDD 3.6V | ||
| Local Temperature Accuracy | 2 | 3 | C | 55C TA +125C, /INT open, 3V VDD 3.6V | ||
| Remote Temperature Accuracy | 1 | 3 | C | 0C TD +100C, /INT open, 3V VDD 3.6V, 0C TA +85C | ||
| Remote Temperature Accuracy | 2 | 5 | C | 55C TD +125C, /INT open, 3V VDD 3.6V, 0C TA +85C | ||
| Local Zone Conversion Time | tCONV0 | 50 | 80 | ms | ||
| Remote Zone Conversion Time | tCONV1 | 100 | 160 | ms | ||
| Remote Temperature Input Current | IF | 224 | 400 | A | T1 or T2 forced to 1.5V, high level | |
| Address Input Low Voltage | VIL | 0.6 | V | 2.7V VDD 5.5V | ||
| Address Input High Voltage | VIH | 2.0 | V | 2.7V VDD 5.5V | ||
| Input Capacitance (A0) | CIN | 10 | pF | |||
| Serial Data I/O Low Output Voltage | VOL | 0.4 | V | IOL = 3 mA | ||
| Serial Data I/O Low Output Voltage | VOL | 0.8 | V | IOL = 6 mA | ||
| Serial Data I/O Low Input Voltage | VIL | 0.3VDD | V | 2.7V VDD 5.5V | ||
| Serial Data I/O High Input Voltage | VIH | 0.7VDD | V | 2.7V VDD 5.5V | ||
| Serial Data I/O Input Capacitance | CIN | 10 | pF | |||
| Serial Clock Input Low Voltage | VIL | 0.3VDD | V | 2.7V VDD 5.5V | ||
| Serial Clock Input High Voltage | VIH | 0.7VDD | V | 2.7V VDD 5.5V | ||
| Serial Clock Input Capacitance | CIN | 10 | pF | |||
| Status Output Low Output Voltage | VOL | 0.4 | V | IOL = 3 mA | ||
| Status Output Low Output Voltage | VOL | 0.8 | V | IOL = 6 mA | ||
| Interrupt Propagation Delay | tINT | tCONV + 1 | s | From TEMP > T_SET or TEMPx < T_HYSTx to INT < VOL, FQ = 00, RPULLUP = 10 k | ||
| Interrupt Reset Propagation Delay | tnINT | 1 | s | From any register read to /INT > VOH, FQ = 00, RPULLUP = 10 k | ||
| Default T_SET0 Value | T_SET0 | 81 | 81 | 81 | C | tPOR after VDD > VPOR |
| Default T_HYST0 Value | T_HYST0 | 76 | 76 | 76 | C | tPOR after VDD > VPOR |
| Default T_SET1 Value | T_SET1 | 97 | 97 | 97 | C | tPOR after VDD > VPOR |
| Default T_HYST1 Value | T_HYST1 | 92 | 92 | 92 | C | tPOR after VDD > VPOR |
| Default T_SET2 Value | T_SET2 | 97 | 97 | 97 | C | tPOR after VDD > VPOR |
| Default T_HYST2 Value | T_HYST2 | 92 | 92 | 92 | C | tPOR after VDD > VPOR |
| Storage Temperature | TS | 65 | +150 | C | ||
| Ambient Temperature Range | TA | 55 | +125 | C | ||
| Package Thermal Resistance (SOIC-8) | JA | 152 | C/W | |||
| Package Thermal Resistance (MSOP-8) | JA | 206 | C/W |