1. Product Overview​

The HIKROBOT MV-CS004-10UC is a high-performance industrial area scan camera engineered for precision machine vision applications requiring exceptional speed and resolution. Featuring a ​Sony IMX267 4.51MP CMOS global shutter sensor, this camera delivers 2448×2048 resolution at up to ​163 fps​ for capturing rapid motion without blur. Its rugged IP67-rated aluminum housing withstands industrial environments with dust, moisture, and mechanical shock. The "10UC" suffix denotes ​10GigE Vision interface​ with Power over Ethernet (PoE+), enabling ultra-fast data transfer and simplified cabling. Integrated I/O ports (2× opto-isolated inputs, 2× outputs) support external triggering and strobe control. With -30°C to +60°C operational range and conformal-coated PCB, it excels in demanding automation scenarios like electronics assembly, pharmaceutical inspection, and high-speed sorting.

​2. Key Technical Parameters​

• ​Sensor: Sony IMX267 (1/1.8" optical size)
• ​Resolution: 2448×2048 (5MP)
• ​Frame Rate: 163 fps @ full resolution
• ​Pixel Size: 3.45μm × 3.45μm
• ​Shutter Type: Global shutter (min. exposure 1μs)
• ​Interface: 10GigE Vision (IEEE 802.3bt PoE+)
• ​I/O: 2× opto-isolated inputs (24V), 2× outputs (24V/0.5A)
• ​Lens Mount: C-mount
• ​Power: 12-24V DC or PoE+ (Class 6)
• ​Environmental:
  • Operating Temp: -30°C to +60°C
  • Humidity: 10-90% RH (non-condensing)
  • Shock: 70G (IEC 60068-2-27)
  • Vibration: 5G (IEC 60068-2-6)
• ​Compliance: CE, FCC, RoHS, GigE Vision v2.0

​3. Primary Applications​

This camera excels in high-speed precision inspection:

• ​Electronics Manufacturing:
  • PCB component placement verification
  • SMT solder joint inspection
• ​Pharmaceutical Packaging:
  • Blister pack seal integrity checking
  • Label position/OCR verification
• ​Automotive Assembly:
  • Connector pin alignment validation
  • Laser welding seam inspection
• ​Food & Beverage:
  • Fill-level control in bottling lines
  • Packaging defect detection
• ​Solar Panel Production:
  • Cell crack detection
  • Busbar alignment inspection
• ​Logistics Automation:
  • High-speed parcel dimensioning
  • Barcode reading at >5m/s
• ​Medical Device Assembly:
  • Micro-component positioning
  • Sterile barrier seal inspection

​4. Product Advantages​

• ​Speed Advantage: 163 fps enables inspection of 300+ ppm production lines
• ​Precision Imaging:
  • SNR: 43.5dB for low-noise imaging
  • 12-bit ADC captures subtle contrast variations
• ​Simplified Integration:
  • Single-cable solution (PoE+) reduces wiring by 60%
  • GenICam compliance ensures plug-and-play with HALCON/MIL/VisionPro
• ​Robust Construction:
  • IP67 sealing withstands washdown cleaning
  • Vibration/shock resistance for robotic cell integration
• ​Advanced Features:
  • Multi-ROI mode for partial scan at 500 fps
  • HDR mode (up to 120dB) for high-contrast scenes
  • Pixel correction & flat-field compensation
• ​Cost Efficiency:
  • 5-year continuous operation lifespan
  • Reduced downtime with >100,000h MTBF

​5. Core Functionality & Vision Capabilities​

The camera operates via ​hardware-triggered acquisition:

1. ​External Trigger: Input signal initiates exposure synchronized with motion
2. ​Global Shutter Exposure: Simultaneous pixel capture eliminates motion blur
3. ​Data Pipeline:
   • 10GbE transfers 1.6Gbps image data
   • FPGA pre-processing (LUT, gamma, decimation)
4. ​I/O Synchronization:
   • Strobe output syncs with exposure start
   • Programmable delay (0-100μs accuracy)

​Advanced Imaging Functions:

• ​Multi-ROI Mode: Simultaneously monitors 8 regions at 500 fps
• ​HDR Imaging: 3 exposures merged in-sensor for 120dB dynamic range
• ​Binning: 2×2 binning boosts sensitivity 4x for low-light conditions
• ​Defect Pixel Correction: Automatic bad pixel mapping
• ​Lens Shading Compensation: Uniform illumination calibration

​Software Integration:

• ​GenICam Compliance: Works with Cognex VisionPro, HALCON, NI LabVIEW
• ​HIKROBOT SDK Features:
  • Chunk data embedding (timestamp/encoder values)
  • Device link aggregation (dual 10GbE redundancy)
  • GigE Vision stream compression (ratio up to 10:1)

Packaging & Shipping

Company Information
Xiamen ZhiCheng Automation Technology Co., Ltdit is a leading global supplier of control system components. We specialize in control systems and drives.

With many years of experience in the industrial sector, we consistently deliver the highest quality of spare parts.which make sure that all this jobs are

perfectly.

we are major in PLC,Sensors,HIM,Transmitters.

Best Supply Brands As Following:1)Bently nevada.2)+GF+.3)Foxobro.Good working environment, perfect team, sincere cooperation →→ Achieve u and our success !!!