Features
The SupFRP® GFRP SDA fiberglass anchor bolt s developed for permanent applications requiring higher levels of corrosion resistance than standard structural steels.
SupFRP® self drilling anchor system is a bolting solution for difficult ground and rock conditions. The system enables drilling and grouting in one operation, making much saving in jobsite and project time.
Advantages
Applications
Technical data
| Product Type | GFRP SDA Bolt H76S | ||
| Material | GFRP (Fiberglass+Epoxy Resin) | ||
| Characteristic Type | Unit | Value | |
| Dia.Outside | mm | 76 | |
| Dia.Inner Hole | mm | 60 | |
| Nominal Cross Sectional Area | mm2 | 1,130 | |
| Guaranteed Tensile Load | KN | 680 | |
| Tensile E-Modulus | GPa | 45 | |
| Ultimate Strain | % | 2.0 | |
| End Load | Steel Nut L100 | KN | 220 |
| Steel Coupler L200 | KN | 220 | |
| Torsion Strength | Nm | / | |
| Weight | kg/m | 3.10 | |
Accessories
Application



SubNumbers
10 Years - The average seniority > 10 years, which is not common in anchor manufacturing industry.
20 Years - 20 years of exporting experience, familiar with different product standards from different
customers and countries.
26 Years - 26 years of exploration and development, SupAnchor has become the No.1 SDA bar
manufacturer in Asia.
60 Countries - customers from 60 countries. Our self drilling anchor systems have been used by
customers from 50 countries all over the world, including America, Chile, Germany,
Australia India, etc.
1,500 Projects - SupAnchor’s products have been widely used in over 1500 massive projects.
| Mechanical strength test ratio | >= | 3% |
| Dimensions test ratio | = | 100% |
| Surface inspection ratio | = | 100% |