Stainless Steel 304 Crimped Wire Mesh For Architecture​

Material: Stainless steel wire 301, 302, 304, 304L, 316, 316L, 321

● Product Features:

1.Strong structure and stable surface.

2.Strong impact resistance and good wear resistance.

3.Uniform mesh size, flat surface, good outlook.

4.High temperature resistance, acid and alkali resistance, corrosion resistance.

5.Various materials and specifications available.

6.Easy to process and widely used.

The main difference between stainless steel crimped wire mesh and plain weave stainless steel wire mesh lies in the weaving method. Crimped wire mesh is pre-bent before weaving the stainless steel wire mesh. According to the wire diameter and opening size matches, or according to clients' requirements, crimped wire mesh can be further classified into several types, such as Plain Crimped Woven Wire Mesh, Intermediate Crimped Wire Mesh or Intercrimped Wire Mesh, Lock Crimped Wire Mesh/Screen, Flat Top Wire Mesh, and others.

Bi-directional Bending Crimped Wire Mesh is suitable for woven wire mesh with fine wire diameters and large mesh openings. Plain Crimp refers to the weaving method where each warp wire passes over and under each weft wire, forming a 90-degree angle between the warp and weft wires. This "up/down" weaving locks the mesh in place using the strength of the metal wire and the size of the mesh openings. The warp and weft wires usually have the same diameter.

●Intermediate Crimped Wire Mesh (Intercrimped Wire Mesh) is the most common variety of crimped wire mesh and is widely used in stainless steel woven wire mesh with fine wire diameters and large mesh openings. Intercrimped Wire Mesh is characterized by using relatively thinner metal wires to create larger mesh openings. Typically, the larger the mesh size, the more times the wires are crimped. The crimps on the metal wires of Crimped Wire Mesh increase the stability of the metal wire mesh.

●Lock Crimped Wire Mesh/Screen is suitable for woven wire mesh with high mesh precision. Lock Crimped Wire Mesh features protrusions or joints on each intersecting set of metal wires. These joints lock the mesh in place and create an extremely rigid product. Lock Crimped Wire Mesh has uniform mesh openings, precise sieving, high wear resistance, and a long service life.

●Flat Top Wire Mesh has all its undulations bent in one direction, leaving the other side smooth. The surfaces of all the metal wires are aligned with each other to present a flat appearance on the front side of the wire mesh. The undulations on the back side are approximately twice the crimp height of tightly locked crimped wire mesh. The original purpose of developing flat top crimped wire mesh was to provide a smooth surface for material flow or to be used as a supporting screen for finer mesh openings. Additionally, it is widely used in the construction industry.

Following is the common specifications of stainless steel crimped wire mesh: