Office Baffle barrier turnstile security gate barcode fingerprint and RFID reader
  
 Flap Barrier Gate Specifications:
  
|  			 
 Item  |  			 			 
 GAT-203-1( single motor ) 
  |  		
|  			 
 Working voltage: 
  |  			 			 
 AC220±10%V 50±10%HZ  |  		
|  			 
 Retractable arm length: 
  |  			 			 
 265mm  |  		
|  			 
 Time of opening: 
  |  			 			 
 0.6 second  |  		
|  			 
 Passage width: 
  |  			 			 
 ≤600mm  |  		
|  			 
 Size 
  |  			 			 
 1200mm /1400mm(L) * 280mm (W) * 980mm (H)  |  		
|  			 
 Reset time after break down: 
  |  			 			 
 10 seconds  |  		
|  			 
 Direction: 
  |  			 			 
 single or bi-directional (optional)  |  		
|  			 
 Drive motor: 
  |  			 			 
 DC 24 V brush motor  |  		
|  			 
 Number of led lamp: 
  |  			 			 
 1pcs or 3 pcs  |  		
|  			 
 Input interface: 
  |  			 			 
 +12V level signal or pulse width>100 ms 
  |  		
|  			 
 Transit speed 
  |  			 			 
 30-40 people/minute  |  		
  
Features of Flap Barrier :
1. working method can be set by the buttons on the main panel
 2. This model is double wing flap gate, low noise, smaller casing, save space
 3. Anti-pinch by mechanism and sensor If there is block during return of gate, motor stops working automatically. Reset again after a default delay, the force 2Kg.
 4. Anti-illegal in, anti-intrusion, auto close for reverse direction.
 5. Anti-collision, gate closes when no valid signal is given.
 6. Gates can be synchronous
 7. uto-reset. If not go through in a preset time, pass right would be cancelled automatically. (1-60s adjustable), default time is 10s.
 8. Reset function by photocells,Anti-pinch function by photocells, ( 3 or 5 pairs sensors)
 9. Compatible with Access control system, consumption system, ESD system, E-ticket system and so on.
 10. One way or two way control
  
detail profile :

