JWS-X10 Vertical Micro-dose X-ray Security Body Scanner, Dual View

Introduction:

Adopted with the global leading micro-dosage X-ray scanning imaging technology, JWS Dual View X-ray Security Body Scanner is able to scan both inside and body surface of the inspected person, without the need for manual search.

Scanning results and performance of JWS-10 X-ray Security Body Scanner against metal and non-metal like guns&ammunition, metal/porcelain knives, explosives, hazardous liquids, microelectronic devices, swallowed or concealed pills and etc are leading in worldwide.

Applications:

Prison, Mine Companies, Detection Facility, Rehabilitation Center, Police Anti- Bureau, Border Patrol, Customs, Airport, Railway Stations, Ports, Warehouse, Government Buildings, Institutes, Meeting Centers

JWS-X10 X-ray Security Body Scanner (Dual View) Parameters:

Advantages - JWS-X10 X-ray Security Body Scanner

1. Mobile Re-Deployment
   Thanks to the vertical scanning structure, the generator and detector of JWS-X10 X-ray Security Body Scanner are fixed on a single base, ensuring a fixed position. The device can be moved as a whole unit without re-adjusting the x-ray beam path, allowing for quick and easy redeployment.
2. Super Simple Installation
   Also thanks to the fixed position of the source and detector, JWS-X10 X-ray Security Body Scanner can be shipped as a whole. During installation, simple cable connections are required for rapid deployment, eliminating the need for complex commissioning.
3. Smaller Footprint
   The vertical scanning structure of JWS-X10 X-ray Security Body Scanner is more smaller, occupying approximately 3.5 square meters. Horizontal scanner, on the other hand, typically requires 5-6 square meters.
4. Better Imaging Quality
   
   Because the generator and detector of JWS-X10 X-ray Security Body Scanner are fixed in position, the beam path is always on the shortest path (as shown in above). Compared to horizontal scanner, the penetration distance is significantly shortened. Under equivalent dose conditions, the detector of JWS-X10 X-ray Security Body Scanner receives a stronger signal, resulting in superior imaging quality.
5. Flexible Scanning Modes
   Horizontal scanner are limited by their structural design and can only make full-body or abdominal scans (requiring an additional source and detector ). Because the generator and detector of JWS-X10 X-ray Security Body Scanner can be moved up and down, scanning of the entire body or any specific area can be performed freely, without the need for additional generator and detectors.
6. Cost Friendly
   Due to unique vertical scanning structure, the detector sizes of JWS-X10 X-ray Security Body Scanner is much smaller than that of a horizontal model. This greatly reduces total hardware costs. This is especially true for dual-view models. While horizontal perimeter probes require two sets of sources and detectors to achieve full-body and abdominal imaging, vertical scanner only require one set of generator and detector, significantly reducing costs. Compared to international brands, JWS-X10 X-ray Security Body Scanner is able to provide 30-50% or more advatanges!