Institutions can deploy the JWS X-ray body scanner to conduct full-coverage non-intrusive security screening and avoid privacy infringement. Its state-of-the-art low-radiation X-ray technology makes it possible to locate hidden threats both externally and internally on the human body, cutting out the requirement for manual body inspections.

The JWS-X10 inspection equipment sets a global benchmark in scanning performance and reliably distinguishes numerous metallic and non-metallic hazards, ranging from firearms and ceramic knives to ammunition, explosives, dangerous liquids, micro components, powdery banned materials and other dangerous prohibited articles.

Prison, Detection Facility, Rehabilitation Center, Security Department, Anti-Bureau, Border Check, Customs, Airport, Railway Stations, Mining, Ports, Warehousing, Meeting Centers, Government Buildings, Institutes.

1. Mobile Re-Deployment
   Thanks to the vertical scanning structure, the generator and detector of JWS-X10 X-ray Security Body Scanner are fixed on a single base, ensuring a fixed position. The device can be moved as a whole without re-adjusting the beam path, allowing for quick redeployment.
2. Faster Installation
   Also thanks to the fixed position of the source and detector, JWS-X10 X-ray Security Body Scanner can be shipped as a whole. During installation, simple cable connections are required for rapid deployment, eliminating the need for complex commissioning.
3. Smaller Footprint
   The vertical scanning structure of JWS-X10 X-ray Security Body Scanner is more compact, occupying approximately 3 square meters. Horizontal scanner, on the other hand, typically requires 5-6 square meters.
4. Shorter Beam Path, Better Imaging
   Because the generator and detector of JWS-X10 X-ray Security Body Scanner are fixed in position, the beam path is always on the shortest, optimal path (as shown in the right figure). Compared to horizontal scanners, penetration distance of vertical scanner is significantly shortened. Under equivalent dose conditions, the detector of JWS-X10 X-ray Security Body Scanner receives a stronger signal, resulting in superior imaging quality.
5. More Flexible Scanning Modes
   Horizontal scanner are limited by their structural design and can only perform full-body or abdominal scans (requiring an additional source and detector ). Because the generator and detector of JWS-X10 X-ray Security Body Scanner can be moved up and down, scanning of the entire body or any specific area can be performed freely, without the need for additional generator and detectors.
6. Cost Friendly
   Due to unique vertical scanning structure, the detector size of JWS-X10 X-ray Security Body Scanner is significantly smaller than that of a horizontal model. This significantly reduces overall hardware costs. While horizontal perimeter probes require two sets of sources and detectors to achieve full-body and abdominal imaging, vertical scanner only require one set of generator and detector, significantly reducing costs. Compared to international brands, JWS-X10 X-ray Security Body Scanner is able to provide 30-50% or more advatanges!