Left Head Driver Curtain Airbag For BMW X3/IX3 2018 ECE Roof Airbag OE739686216
Left Head Driver Curtain Airbag For BMW X3/IX3 2018 ECE Roof Airbag OE739686216
Product Specifications
| Item | Head curtain Airbag |
| Vehicle Model | BMW X3/IX3 |
| Model Years | After 2017 |
| Regional Compatibility | Europe / America / Middle East |
| Quality Standard | Original / Aftermarket |
| OE/OEM Part Number | 739686216 |
Frequently Asked Questions
What is the function of the airbag?
It is installed above the car door or inside the A-pillar or C-pillar on the vehicle roof. In the event of a side collision or a severe rollover accident, it will ignite instantly, generating a large amount of gas, which will rapidly inflate and deploy the folded fabric air curtain, forming a protective barrier similar to an "air pillow", to protect the heads of the passengers inside the vehicle from being hit.
Which BMW models and years are this airbag suitable for?
According to the information on the part label, it is mainly applicable to: Core model: BMW X3 (chassis code G01). Year range: From 2017 (up to the model update of this vehicle). Reason for adaptation: The "G01" on the label is the exclusive chassis code for the first generation of BMW X3, while "2017" corresponds to the starting year of production for the X3. Possible expansion: As the BMW G01 platform shares a large number of components with models such as G02 (X4) and G08 (iX3), this part may also be applicable to these vehicles on the same platform. However, further verification through the official catalogue or vehicle identification number (VIN) is required.
What does the "RH" on the airbag label mean?
RH is the abbreviation of "Right Hand", meaning the right side. This indicates that the gas generator is installed on the side of the passenger seat (that is, on the right side of the vehicle). Important Note: The gas generator on the left (driver's side) has a different part number. These two units must not be interchanged; otherwise, it may cause the airbag to fail to deploy properly or deploy in the wrong position, posing safety risks.
Can this part be purchased and installed by oneself?
It is strongly advised against installing or replacing it on your own. The reasons are as follows: Safety risk: The safety airbag system (SRS) involves high-voltage circuits and explosives. Non-professional operation may result in the accidental detonation of the airbag, causing personal injury. Matching requirements: In addition to the part number, it is also necessary to ensure that it is completely compatible with the production year and configuration of your vehicle (such as whether it has a sunroof, whether it is a high-end or low-end model). Different configurations of vehicles may have different curtain lengths and installation points. System reset: After replacement, it is usually necessary to use a diagnostic computer to reset the airbag system or clear the fault codes. Otherwise, the airbag fault indicator light on the dashboard will remain constantly illuminated.