Briquette Size Φ200mm 3-5 Pieces/Minute Briquette Machine

Introduction of briquette machine

Metal briquette machine presses the metal waste under high pressure into a briquette form. Normally it is used to reduce the storage cost as well as the conversion ratio in the furnace for metal recycling. The study shows the energy cost to get metal from metal recycling is only 50-90% by using raw minerals. Also, this will help to reduce the exhaust on the metal manufacturing process.

Energy consumption from recycling compare to use raw mineral

Aluminium 95%

Copper 82%

Zin 62%

Pb 73%

The raw material cost takes about 60% in the foundry industry. If you want to own a positive market competitiveness under the same foundry technology, you must find cheaper material, the metal chips is a good substitution. And the briquetting metal brings more economic than directly use metal chips for smelting. Take iron as an example, the chips’ value amounts tens of the briquette, so the oxidation ratio is very high and easy to be blown away by the strong wind in the furnace, total the waste ratio is nearly 30%, but if use the briquette, the waste rate is only 5%. this means the metal chips after compress to be briquette, can improve 25% user ratio.

Raw Materials of briquette machine

Aluminum swarf/chipsCast Iron swarf/chips, Copper swarf/chips, Steel swarf/chips, Stainless Steel swarf/chips, Brass swarf/chips, Titanium swarf/chips, Nickel swarf/chips, etc.

Advantages of briquette machine

1. Hydraulic drive, stable operation, no vibration, safe and reliable;

2. Simple equipment foundation is needed;

3. It is controlled by PLC and can be operated manually or automatically.

4. Automatic feeding mechanism can be added according to user's requirements.

5. The whole steel casting is used in the frame to improve the reliability, stability and service life of the equipment.

Technical data of briquette machine