The Adjustable Steel Scaffolding Prop is a reusable temporary support component designed for formwork, slab support, beam support, and general construction scaffolding applications. The prop consists of an adjustable inner tube, outer tube, threaded collar, pin holes, base plates, and a handle or locking arrangement depending on the selected configuration.

Its telescopic structure allows the working length to be set for different site conditions, while the steel construction provides a practical and dependable support solution for building projects.

The adjustable scaffolding prop is engineered for controlled height adjustment and stable installation. The outer tube and inner tube work together through the threaded collar and locking pin, while the base plates help distribute contact at the top and bottom of the support.

Surface options may include painted steel or other treatments depending on the order specification. Available configurations can vary in tube size, adjustment range, plate dimensions, finish, color, and accessory selection.

Please confirm the required working length, loading requirement, and site standard before purchase.

After the prop is positioned vertically, the inner tube is set close to the required height, the pin is engaged, and the collar is tightened to achieve firm contact with the supported structure.

Adjustable steel props are commonly used for concrete formwork, slab construction, beam support, renovation, temporary bracing, and indoor or outdoor construction scaffolding support. The support must be installed on a suitable base and used according to an approved engineering and site safety plan.

Key advantages include adjustable working length, reusable steel construction, simple installation, compact storage, and compatibility with common temporary support work.

Production may include tube cutting, forming, welding, threading, surface treatment, assembly, dimensional inspection, and packing.

Before quotation, please provide the required length range, tube specification, plate size, quantity, surface finish, application, and destination. We can confirm configuration, packaging, samples, and technical details according to the project requirement.

• Inspect the prop before use — check tubes, threads, pins, plates, welds, and collars.
• Place the prop vertically on a firm and level base.
• Set the required height, engage the locking pin, and tighten the collar.
• Verify full contact with the supported structure before loading.

• Do not use a damaged, bent, modified, or incomplete prop.
• Do not exceed the verified working load.
• Do not use unstable foundations.
• Do not remove supports without engineering approval.

The actual load, length range, and applicable standard must be confirmed for each project. For a quotation, please send the required dimensions, application, quantity, and delivery location.