Inverter Controls Fertilizer Weighing Filling Packing System Machine

Technical Parameters

Machine Developing Background Introduction

- With the world society developing at an amazing speed, the labor cost and the working efficiency has already become a major concern of many big enterprises. Meanwhile, how to improve the packing technology and help customers to solve their problem also becomes a big target for all the packing machine manufacturers;
- Grasp the key point, Saimo Eagle Automation self-developed the newest generation SXPA5O Automatic Big Bag Bagging & Palletizing Machine to meet the great market needs; since then, the machine unit has been put into market for more than ten years and has been greatly accepted by many customers all over the world;
- The whole machine line starts from front line connecting, material measuring, filling, bag feeding & clamping, bag conveying & sewing, finished products comes out; Further line shall continue with bag push down system, bag shaping conveying system, robot palletizing system & pallet stock system; palletizing system & pallet stock system

Machine main parts list (subject to actual configuration)

Machine Features

1. PLC control system with low failure rate and higher reliability.

2.The host adopts fast and the slow inverter controls material filling.

3. It has automatic storage of production information.

4.The operating parameters can be stored for later use, avoiding recalibration when changing materials cyclically.

5.Accurate measurement accuracy and easy equipment cleaning, no blocking.

Precautions for use

Notice: use specified supply voltage, this machine adopts single-phase 3-wire (AC380V, 50Hz), it shall be avoided to roll press the power line and the power line shall be rolled with hands when it is not used;
Notice: please keep the equipment clean inside and outside and avoid moisture;
Notice: please do not change any part on the machine;
Notice: before formal startup, be sure to confirm that each switch parameter operates normally, otherwise, the equipment may be damaged;
Notice: before formal startup, if the specification needs to be changed, please perform operation in strict accordance with the specification change steps, otherwise, the equipment may be damaged;
Notice: please do not place moist and dirty articles on the equipment deck.