Large Span Metal Storage Buildings Glass Wool Sandwich Panel Equipped
Product Specifications
| Attribute | Value |
| Raw steel material | Q235B, Q355B, ASTM A36 |
| Surface treatment | Painting or Hot-dip Galvanize |
| Shot blasting level | Sa 2.5 |
| Service life | 50 Years |
| Wall and Roof | Glass wool sandwich panel |
| Columns and Beam | H Section Column & Beam, Latticed column |
| Service | Design, Fabrication, Installation |
| Application | Steel structure warehouse, workshop, factory building |
Project Overview
This large span metal storage building is designed for wine production and storage facilities. The steel frame structure provides more indoor space compared to concrete buildings and offers better compatibility with production equipment.
Project Specifications
| Parameter | Value |
| Structure Type | Portal frame, single ridge, double span |
| Length | 100m |
| Width | 45m |
| Eave Height | 9m |
| Span | Double span |
| Steel structure quantity | 300 Ton |
| Column & Beam | H-section steel, latticed column, honeycomb beam, truss beam |
| Roof & Wall sandwich panel | 75mm Glass wool sandwich panel |
| Door | Sliding door |
| Window | Ribbon Skylight |
Technical Components
Steel Frame: H section steel (Q235/Q345 steel 8mm/10mm)
Welding: Automatic submerged arc welding
Rust removal: Sand blasting
Surface finish: Alkyd paint or galvanized
Intensive bolt: M20, Grade 10.9
Structural Advantages
- High strength and light weight: Steel offers exceptional strength-to-weight ratio, enabling large span structures.
- Excellent plasticity and toughness: Withstands accidental overloads and dynamic loads effectively.
- Industrialized production: Precision manufacturing in specialized facilities ensures quality.
- Rapid construction: Prefabricated components enable fast on-site assembly.
- Superior wind resistance: Lightweight yet rigid structure offers excellent stability.
- Cost efficiency: Reduced foundation requirements and faster completion lower overall costs.
- Environmentally friendly: Steel is fully recyclable with minimal construction waste.
Design Visualization
Manufacturing Facility
Quotation Requirements
| 1 | Location (where will be built?) | _____country, area |
| 2 | Size: length*width*height | _____mm*_____mm*_____mm |
| 3 | Wind load (max. wind speed) | _____kn/m2, _____km/h, _____m/s |
| 4 | Snow load (max. snow height) | _____kn/m2, _____mm |
| 5 | Anti-earthquake | _____level |
| 6 | Brickwall needed or not | If yes, 1.2m high or 1.5m high |
| 7 | Thermal insulation | If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be suggested |
| 8 | Door quantity & size | _____units, _____(width)mm*_____(height)mm |
| 9 | Window quantity & size | _____units, _____(width)mm*_____(height)mm |
| 10 | Crane needed or not | If yes, _____units, max. lifting weight____tons; max. lifting height _____m |