ZL-7011 Vertical low-temperature testing machine features a vertical design that eliminates the need to bend over when handling specimens, making operation more convenient and user-friendly. This machine is used to test finished shoes, rubber, plastics, shoe soles, synthetic leather, and other materials in cryogenic or cool environment conditions. Constructed from stainless steel, it can accommodate various fixtures to meet different testing requirements.
Operative standards: ASTM-D1790, D1593, JIS-K6545, SATRA TM92
Applied to test leather performance in shoes, clothing, luggage, and handbag industries; research laboratories; commodity inspection, arbitration, and technical supervision departments.
| Model | ZL-7011 |
| Inside Size D×W×H | 400×500×400mm (L*W*H) |
| Fixture | Based on actual demand, such as sole folding, leather folding and shoes folding |
| Temperature Range | Normal temperature ~ -30℃ |
| Uniformity | ≤±0.5℃/+2℃-3℃ |
| Cooling Time | -25℃~-30℃ (about 80min) |
| Controller | LED digital (from Taiwan) P,I,D +S,S,R.microcomputer controller |
| Accurate Range | Setting accuracy: temperature ±0.1℃, directed accuracy: temperature ±0.1℃, resolution: ±0.1℃ |
| Cooling System | Totally enclosed air-cooled single-stage compression refrigerate mode / original from French "Taikang" / totally enclosed air-cooled re-compression refrigerate mode |
| Compressor Start Delay | 5min |
| Circular System | Temperature, low-noise, air-conditioning-type motor. Multi-vane centrifugal wind wheel |
| Outside Material | High-quality carbon steel plate. Phosphide electrostatic spray treatment / SUS304 stainless steel hairline treatment |
| Inside Material | SUS304 High-quality stainless steel light board |
| Insulation Material | Rigid polyurethane foam, ultra-fine glass fiber cotton |
| Standard Collocation | a set of Multi-heated glass window attached lighting, testing product shelf 2 pcs, test leads holes (25,50 mm) 1 pcs |
| Safe Protection | Leak current, short circuit, over temperature, motor overheating, over-pressure compressor, overload, over-current protection |
| Timing | 0.1~999.9(S,M,H) adjustable |
| Power | 2.5KW |
| Voltage | AC380V±10% 50±0.5Hz Three-phase five-wire system |
| Environmental Temperature | 5℃~+30℃ ≤85%R.H |
Note:
1. Above data were measured at temperature (QT) 25 ℃ and no-load condition.
2. Can be customized non-standard-type high-low-temperature testing machine according to user requirements.