Lobe Biogas Blower, alkali and bio gas use roots blower, explosion-proof type
Features
1. Compact structure, inlet and outlet same construction, various kinds of installation type
2. Impeller and shaft is cast as a whole part for smooth operation.
3. Water cooling structure is adopted for protecting bearing from over-heating.
4. All flow passage parts are sprayed with special coating (PTFE) , featured of well corrosion resistance.
5. Blower is designed for the application of special medium of acid, alkali and other corrosive gas.
Specifications
|
Model |
YU-EG100 |
|
Air capacity |
4.29-9.81m3/min |
|
Discharge differential pressure |
10-70KPA |
|
Rotary speed |
1000-1600rpm |
|
Cooling water volume |
10 l/min |
|
Motor type |
4-7.5/11-15KW 380/400/415/440V, 3PHASES, 50/60HZ, explosion-proof type motor |
|
Installation type |
Standard: vertical type |
|
N.W. of blower without motor |
255kg |
|
Packing size Approx. |
1.9*1.2*1.35m (length*width*height) |
Parameter sheet
| Model | Port Dia | Inlet capacity (m3/min)and shaft power (kW) under various pressure | Cooling | ||||||||||||||
| Speed rmp | 0.1kgf/cm2 | 0.2kgf/cm2 | 0.3kgf/cm2 | 0.4kgf/cm2 | 0.5kgf/cm3 | 0.6kgf/cm4 | 0.7kgf/cm5 | water | |||||||||
| 1000mmH2O | 2000mmH2O | 3000mmH2O | 4000mmH2O | 5000mmH3O | 6000mmH4O | 7000mmH5O | (l/min) | ||||||||||
| 0.01Mpa | 0.02Mpa | 0.03Mpa | 0.04Mpa | 0.05Mpa | 0.06Mpa | 0.07Mpa | |||||||||||
| m3/min | KW | m3/min | KW | m3/min | KW | m3/min | KW | m3/min | KW | m3/min | KW | m3/min | KW | ||||
| YU-EG100 | 100(4") | 1000 | 5.75 | 1.78 | 5.33 | 2.98 | 5.01 | 4.52 | 4.47 | 5.19 | 4.50 | 6.39 | 4.29 | 7.58 | 10 | ||
| 1150 | 6.77 | 2.04 | 6.35 | 3.43 | 6.02 | 5.20 | 5.75 | 5.97 | 5.52 | 7.34 | 5.31 | 8.72 | 5.10 | 9.83 | |||
| 1250 | 7.44 | 2.22 | 7.02 | 3.73 | 6.70 | 5.65 | 6.43 | 6.49 | 6.19 | 7.98 | 5.98 | 9.47 | 5.78 | 10.69 | |||
| 1350 | 8.12 | 2.40 | 7.70 | 4.03 | 7.37 | 6.11 | 7.10 | 7.01 | 6.87 | 8.62 | 6.66 | 10.23 | 6.45 | 11.55 | |||
| 1500 | 9.13 | 2.66 | 8.71 | 4.47 | 8.39 | 6.78 | 8.12 | 7.79 | 7.88 | 9.58 | 7.67 | 11.37 | 7.47 | 12.83 | |||
| 1600 | 9.81 | 2.84 | 9.39 | 4.77 | 9.06 | 7.24 | 8.79 | 8.31 | 8.56 | 10.22 | 8.35 | 12.13 | 8.14 | 13.68 | |||
Structure of blower main body

Assembling drawing of blower package

Standard supply of scope
1. shaft blower
2. vacuum pressure relieve valve
3. check valve
4. inlet silencer(with filter)
5. discharge silencer
6. public base (with belt cover)
7. rubber flexible joint and shock pad
8. pulley
9. pressure gauge
10. belt
11. bolts and nuts and other connection parts
12. motor