Overview

• • The Fanuc M10iD 12 is a six axis welding robot set up for welded steel pipe work, including joints with an 80 mm inner diameter.
• • A 12 kg payload covers welding torch, wire feeder and a seam sensor, with margin for fixture mounted options.
• • The 1441 mm working reach lets the arm follow pipe joints and reach both sides of a fixture without repositioning the part.
• • IP54 protection keeps dust and weld spatter out of the arm joints, which supports continuous production in fabrication shops.
• • The package is delivered as a welding workstation configuration, including welder, torch and seam tracking options.

Specifications

Advantages

• • A 12 kg tool load accommodates torch, wire feeder and seam tracking hardware in one mounting without derating motion.
• • The 1441 mm reach covers both sides of a pipe fixture, which reduces part re clamping between passes.
• • Six axis articulation keeps torch angle stable around curved joints, so weld bead profile stays even.
• • IP54 sealing limits dust and spatter ingress, extending joint life in a fabrication environment.
• • A 145 kg arm weight suits robot stations mounted on standard steel frames rather than heavy foundations.
• • The workstation configuration ships with welder, torch and seam tracking choices to match your joint type.
• • A one year warranty and local service network support spares planning for production welding cells.
• • The robot mounts on a standard steel frame, and cable routing for torch and feeder follows the arm through the wrist.

Applications

• • Welding 80 mm inner diameter welded steel pipe joints.
• • Fabricating pipe spools and structural tube assemblies.
• • Welding bracket rings and flanges onto steel pipe sections.
• • Batch production of pipe frames for industrial equipment.
• • Repair and rework welding where torch access is tight.
• • Welding cells paired with positioners for long seams.

FAQ

• • What pipe size is this setup for? The station is configured around welded steel pipe joints with an 80 mm inner diameter, and other sizes can be quoted.
• • How much payload is available for tooling? The robot is rated at 12 kg tool payload, which covers torch, feeder and sensor hardware.
• • Does it include a welding machine? The workstation configuration includes welder, torch and seam tracking options, specified against your weld procedure.
• • Can it run continuous shifts? Yes, IP54 sealing and servo-electric drives support continuous production when maintenance intervals are followed.
• • What is the warranty? A one year warranty applies, with spare parts and technical support available locally.