Overview

• • The KUKA KR210 R2700-2 is a six axis robot configured for 3D printing of buildings and bridges.
• • A 2700 mm working reach covers wall sections and bridge elements in successive print passes.
• • The 1077 kg body keeps the arm stable while a print head lays material at controlled speed.
• • IP67 protection allows outdoor work in dusty and damp construction environments.
• • Print paths are programmed offline and transferred to the controller, so on site time is spent printing rather than teaching.
• • Commissioning follows a documented checklist, so the cell reaches production without open items.

Specifications

Advantages

• • A 2700 mm reach prints wall sections and bridge elements without moving the base between passes.
• • IP67 sealing supports outdoor work through dust and light rain on construction sites.
• • The 1077 kg body resists reaction forces from material deposition, keeping bead width even.
• • Six axis motion keeps the print head normal to the surface on curved and inclined walls.
• • Offline path programming means site time is used for printing rather than teaching points.
• • A 1 kW drive package keeps travel speed stable, which controls layer height.
• • Standard mounting plates accept different print heads for mortar, paste and composite materials.
• • Local service support covers calibration and print path tuning during project ramp up.
• • Maintenance points sit at floor level, so planned service stops stay short.
• • Chain driven material feed delivers mortar evenly, which keeps bead cross section stable.
• • The cell is delivered with a commissioning checklist covering base levelling and nozzle calibration.
• • The cell documentation includes a spare parts list covering routine wear items.

Applications

• • Printing wall sections for low rise buildings.
• • Printing bridge elements and formwork components.
• • Decorative architectural panels and facade features.
• • Prototype structures for construction research.
• • On site printing where formwork cost is high.
• • Repetitive structural elements produced in series.
• • Routine production work in general industry fabrication.

FAQ

• • What can the robot print? The robot prints building wall sections, bridge elements and architectural components using a matched print head.
• • Can it work outdoors? Yes, IP67 protection supports outdoor construction sites with dust and light rain exposure.
• • How is the print path created? Paths are programmed offline from the design model and transferred to the robot controller.
• • Which materials are supported? Mortar, paste and composite materials are used depending on the print head and mix design.
• • What warranty applies? A one year warranty covers the robot under normal operating conditions.
• • Is training included? Commissioning includes operator training on programming, daily checks and safe restart procedures.