Cheapest Road Marking Paint Thermoplastic Road Marking Paint Suppliers
Product Description
Thermoplastic paint, commonly referred to as thermoplastic road marking paint, is a type of road marking material widely used for creating durable and highly visible markings on roads, highways, and parking lots. It is applied in a molten state and forms a hard, durable coating once cooled. This paint is known for its long-lasting performance and resistance to wear.
Composition:
- Binder Resins:
- Made from thermoplastic materials such as hydrocarbon or alkyd resins.
- Provides adhesion and flexibility.
- Pigments:
- Responsible for color, with white (titanium dioxide) and yellow (lead chromate or organic pigments) being common.
- Fillers:
- Calcium carbonate or other materials increase volume and reduce cost.
- Glass Beads:
- Added for retroreflectivity, enhancing night-time visibility.
- Additives:
- Include stabilizers, plasticizers, and anti-settling agents for improved application and performance.
Common Uses:
- Lane markings on highways and city roads
- Pedestrian crossings and zebra stripes
- Parking lot markings
- Safety markings like arrows, symbols, and other traffic guidance symbols
Hot melt road marking paint is popular because it offers a combination of durability, visibility, and cost-effectiveness, especially for areas that see a lot of traffic.
Tips for Best Results:
- Weather Considerations: Avoid applying hot melt paint in extreme weather (rain, high humidity, or very cold temperatures) as this can affect its performance.
- Quality Control: Regularly check the paint’s viscosity and temperature during application to maintain optimal performance.
- Equipment Calibration: Ensure that the marking machine is calibrated properly for consistent lines and correct paint thickness.
Hot melt road marking paint is highly durable and performs well, but proper application is essential to maximize its lifespan and effectiveness.




Technical Specification
| Density(g/cm3) | 1.8-2.3 |
| Softening point (℃) | 90-125 |
| Compressive Strength(MPa) | ≥12 |
| Glass bead content(%) | 0-30% |
| Liquidity | 35±10 |
| Packing | 25kg/bag |
| Color | White/Yellow/Blue/Red/Green/Customized |
| Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
| Appearance | Powder |
| Construction temperature | 180℃-220℃ |
| Whiteness | 70-85(Customized) |
| Inverse coefficient | 50-550 |
| Warranty | 12 months |
| Storage Method | Avoid light and moisture |
| Packing Size | 45×70×5CM |