Name: Thermoplastic Road Marking Paint For Road Surfaces With Quick Hardening Time And Strong Adhesion
Brand: HUA QUN
Price: 1 USD

Steps to Use Thermoplastic Road Marking Paint

Ensure the road surface is clean, dry, and free of dust, dirt, grease, or moisture for proper adhesion.
For old roads, remove any loose paint or debris.
If necessary, apply a primer to improve adhesion, especially on concrete surfaces.

Use a preheater or thermoplastic melting kettle to heat the paint to around 180-200°C (356-392°F).
Stir continuously to maintain an even consistency and prevent burning.

Hand or Machine Application:
- Screed, Extrusion, or Spray Machine – For large road markings, use a specialized road marking machine.
- Hand-Pushed Applicator – Suitable for smaller projects or touch-ups.
Apply the molten thermoplastic evenly on the road surface at a thickness of 1.5 to 3 mm.

While the paint is still hot, sprinkle glass beads on top to enhance reflectivity.
Some thermoplastic paints contain pre-mixed glass beads, but additional beads may still be applied manually or automatically.

The marking cools and hardens within 2-5 minutes, forming a durable and traffic-resistant layer.
Allow sufficient time for full curing before opening to traffic.

Thermoplastic Road Marking Paint For Road Surfaces With Quick Hardening Time And Strong Adhesion

Technical Specification

Gravity(g/㎥)	2.1g/㎥
Color	Yellow, Orange, Red and etc.
Heating Temperature	180℃-220℃
Softening Point(℃)	110℃
Coating Appearance	No wrinkles, dots, blisters, cracks,fall-out&stick tyres
Drying Time(min)	Within 3 minutes
Chroma Performance	Reverse materials(white)
Compressive Strength(Mpa)	26
Abrasive Resistance(mg)	42
Alkali Resistance	Great (in saturated solution of calcium hydroxide for 24 hours
Glass Beads(%)	19%
Fluidity(s)	40s
Coating Resistance	Resis -10℃ for 4 hours
Package	25kg/bag, by plastic woven bag. One 20’container can load Max 26 tons
Heat Resistance	Under 200℃-220℃ for hours
Material	C5 Petroleum Resin, CACO3, Wax, Glass Beads, EVA, PE and so on.
Application	Road marking, straight line, dotted line, curve, oriented arrow,letter and etc.
Water Resistance	Great (in water for 24 hours)

Density(g/cm3)	1.8-2.3
Softening point (℃)	90-125
Compressive Strength(MPa)	≥12
Glass bead content(%)	0-30%
Liquidity	35±10
Packing	25kg/bag
Color	White/Yellow/Blue/Red/Green/Customized
Executive standard	JT/T280-2004/AASHTO/BS3262/Customized
Appearance	Powder
Construction temperature	180℃-220℃
Whiteness	70-85(Customized)
Inverse coefficient	50-550
Warranty	12 months
Storage Method	Avoid light and moisture
Packing Size	45×70×5CM

Thermoplastic Road Marking Paint for Road Surfaces with Quick Hardening Time and Strong Adhesion

Thermoplastic Road Marking Paint For Road Surfaces With Quick Hardening Time And Strong Adhesion