2007169-1 1x6 SFP+ Cage Assembly Overview

The 2007169-1 is a high-performance 1x6 SFP+ Ganged Cage Assembly engineered for demanding networking, telecommunications, and data center applications. Designed to support high-speed signal routing, this 6-port pluggable I/O cage delivers maximum data rates of up to 16 Gb/s per port.

This model comes fully equipped with a standard integrated light pipe for clear visual port status indication and an elastomeric EMI gasket to ensure superior electromagnetic interference containment. Constructed from durable Nickel Silver and rated for extreme operating temperatures (-55°C to 105°C), the 2007169-1 provides uncompromising reliability for your mission-critical PCB designs.

Why Choose the 2007169-1 16 Gb/s SFP+ pluggable I/O?

• A 6-port SFP+ cage assembly in a ganged configuration
• Sealable construction for more protected installations
• EMI gasket containment for improved signal shielding
• Press-fit through-hole termination for secure PCB mounting
• A solution rated for industrial temperature operation

Specifications of 2007169-1SFP+ Cage with Light Pipe

2007169-1 Drawing - Recommended PCB Layout

Design and Integration Notes

This cage assembly is intended for SFP+ pluggable I/O applications where mechanical alignment, EMI control, and port density are important. The press-fit through-hole mounting supports dependable PCB attachment, while the nickel silver cage material helps provide a robust structural foundation.

For layout planning, the recommended PCB thickness of 1.5 mm should be considered during board design and mechanical validation. Since the part is not heat sink compatible, thermal architecture should be evaluated at the system level based on the final module and chassis environment.

Target Applications

The 2007169-1 SFP+ 1x6 Cage Assembly is ideal for high-density routing in the following applications:

★ Enterprise Switches and Routers
★ Data Center Servers and Storage Arrays
★ Telecommunications Base Stations
★ Network Interface Cards (NICs)
★ Industrial Networking Equipment

Frequently Asked Questions About 2007169-1 Ganged SFP+ cage

The 2007169-1 1 x 6 SFP+ Cage Assembly is a sealable, six-port, ganged SFP+ cage with light pipe and EMI gasket support. With 16 Gb/s maximum data rate, press-fit through-hole termination, and industrial temperature performance, it is a strong fit for high-density network and signal designs.

1. What is the 2007169-1 used for?

It is used as a 1 x 6 SFP+ cage assembly for high-density pluggable I/O applications, especially where EMI control and secure board mounting are needed.

2. Does the 2007169-1 include a light pipe?

Yes. This cage assembly includes a standard light pipe.

3. Is the 2007169-1 sealable?

Yes. The product is specified as sealable.

4. What is the maximum data rate?

The maximum data rate is 16 Gb/s.

5. How is the cage attached to the PCB?

It uses through-hole press-fit termination.

6. What temperature range does it support?

The operating temperature range is -55°C to 105°C.