| | 1) 100/1000 Base-T LPJG16314A4NL Single Port RJ45 Connector with Integrated Magnetics |
| 2) THT Mounting Type | |
| 3) 350uH Min OCL @100KHz,0.1Vrms,8mADC BIAS | |
| 4) Complies with IEEE 802.3 specification | |
| 5) Operation temperature range 0°C~70°C | |
| 6) Impedance: 100 ohms | |
| Application | ×DSL Modems |
| Embedded PC | |
| LAN Applications | |
| Hub, Router, Switches | |
| AVR, DVR | |
| Electrical Characteristics |
|
| Shielded | YES |
| Termination Features |
|
| EMI Finger | WITH |
| Termination Method | Solder |
| Body Features |
|
| LED | With |
| Latch Orientation | Tape UP |
| PCB Tail Length | 3.5±0.5mm |
| Height Above Board | Optional |
| Contact Features |
|
| Preloaded | YES |
| Contact Termination Type | Through Hole |
| Industry Standards |
|
| Lead-Free Solder Process | Wave solder capable to 260°C |
| RoHS Compliance | RoHS-Compliant |
| Conditions for Usage |
|
| Applies To | Printed Circuit Board |
| Environmental Conditions | Office / Premises |
| Operating Temperature(°c) | 0°C~70°C |
| Other Features |
|
| Status Indicator | LED |
| Left LED Color | GREEN&YELLOW |
| Right LED Color | GREEN&YELLOW |
| Singal Lead Quantity | 8 |
| Datasheets |
1. Impedance: 100 ohms
2. OCL: 350uH Min @100KHz,0.1Vrms,8mADC BIAS
3. Turns Ratio: 1:1
4. Insertion Loss: 0.5-100MHz: -1.1dB Max
5. Return Loss (dB Min):
0.5-40MHz: -18
40.1-100MHz: -12-20L0G (f/50)
6. Crosstalk (dB Min):
0.5-40MHz: -35
40.1-100MHz: -33-20L0G (f/50)
7. Common Mode Rejection Ratio: 0.5-100MHz: -30dB Min
8. Isolation Voltage: 1500Vrms Min
1. Designed to support application, such as SOHO(ADSLmodems), LAN-on-Motherboard(LOM), hub and Switches.
2. Meets IEEE 802.3 specification
3. Connector Materials:
Housing: Thermoplastic PBT+30%G.F UL94V-0
Contact: Phosphor Bronze C5210R-EH Thickness=0.35mm
Pins: Brass C2680R-H Thickness=0.35mm f
Shield: SUS 201-1/2H Thickness=0.2mm
Contact Plating: Gold 6 micro-inches min. In contact area.
4. Wave solder tip temperature: 255℃ Max,5 Sec Max.