RB1-126BHQ1A Network RJ45 Telephone Jack LPJ0075BHNL Female Connector & PoE
   	- RJ-45 connector integrated with Filter
  	- Size same as RJ-45 connector to save PCB board space
  	- Reduce EMI radiation, Improve EMI performance
  	- High performance for maximum EMI suppression.
  	- ISO9001,SGS,UL,CE,REACH
  	- Reduce EMI radiation, Improve EMI performance
  	- 1X1  RJ45 Magjack with/without leds, meeting IEEE 802.3u
  
   	 		 			| LINK-PP Part Number |  			LPJ0075BHNL |  			  |  		
 		 			| Designing Model |  			RB1-126BHQ1A |  		
 		 			| Cores per Port |  			6 |  		
 		 			| LED Option |  			GREEN/YELLOW |  		
 		 			| Latch |  			TAB DOWN |  		
 		 			| Number of Ports |  			1X1 |  		
 		 			| PCB Mount Angle |  			SIDE ENTRY |  		
 		 			| Package Height (mm) |  			13.4 |  		
 		 			| Package Length (mm) |  			21.3 |  		
 		 			| Package Width (mm) |  			15.9 |  		
 		 			| Shield EMI Tabs |  			WITHOUT |  		
 		 			| Speed |  			10/100 BASE-T |  		
 		 			| Temperature |  			0 TO 70℃ |  		
 		 			| Turns Ratio RX |  			1CT:1CT |  		
 		 			| Turns Ratio TX |  			1CT:1CT |  		
 	 
   
  1. Product Type Features:                                                  
    1) Product Type = Connector  
   2) Jack Type = RJ45 
   3) Profile = Standard 
   4) PCB Mounting Orientation = Side Entry (Right Angle)
  2. Mechanical Attachment: 
   1) Jack Configuration = 1 x 1
  3. Electrical Characteristics: 
   1) Shielded = Yes
  4. Termination Related Features:
   1) EMI Finger - Bottom = Without
   2) Termination Method = Solder
  5. Body Related Features:
   1) Port Configuration = Single/Multi
   2) EMI Fingers -Top and Sides = With/ Without
   3) Latch Orientation = Standard - Latch Down
   4) PCB Tail Length
  6. Contact Related Features:
   1) Preloaded = Yes
   2) Contact Termination Type = Through Hole/Surface Mount
  7. Housing Related Features:
   1) Connector Style = Jack
  8. Industry Standards:
   1) RoHS/ELV Compliance = RoHS compliant, ELV compliant 
   2) Lead Free Solder Processes = Wave solder capable to 240°C,
        Wave solder capable to 260°C, Wave solder capable to 265°C
   3) RoHS/ELV Compliance History = Always was RoHS compliant
  9. Identification Marking:
   1) Left LED Color (Position #1) = Green - 250 ohm resistor
   2) Right LED Color (Position #2) = Green - 250 ohm resistor
  10. Conditions for Usage:
   1) Applies To = Printed Circuit Board
   2) Environmental Conditions = Office / Premises
   3) Operating Temperature (°C ) = 0 - 70/-40 - +85
   
  Applications:
  Used for networking and communication equipments such as HUB, PC card, Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem
   
   Main Customer
  Design for Ti , Intel , Samsung , Fluke , Jabil , Flextronics ,Cypress, Freescale,EKF.......
   
  EMS Application
  Built-in Flexible PCB Assembly; Rigid-Flexible PCB Assembly; Microelectronic, Flip Chip; Microelectronic, Chip On Board; Optoelectronic Assembly; RF / Wireless Assembly; Through Hole Assembly; Surface Mount Assembly; System Assembly; Printed Circuit Board Assembly