Keysight (Agilent) 54853A Infiniium Oscilloscope: 4 Channels, 2.5 GHz, up to 20 GSa/s
The Keysight Agilent 54853A Infiniium Oscilloscope, when paired with the InfiniiMax 1131A probing system (including 1131A probe amplifier plus E2668A single-ended connectivity kit and/or E2669A differential connectivity kit), delivers full real-time bandwidth of 2.5 GHz supported by a 20 GSa/s sample rate on every channel. This industry-leading sample rate ensures more accurate and repeatable measurements while avoiding measurement errors and signal aliasing caused by waveform undersampling. The innovative InfiniiMax probing system meets even the most demanding mechanical access requirements without compromising performance.
Key Features
- 150 Mb/s to 7 Gb/s or to 12.5 Gb/s pattern generator and error detector
- >0.5 UI calibrated and integrated jitter injection
- Excellent signal performance and sensitivity
- Built-in clock data recovery with tunable and compliant loop bandwidth
- 2.5 GHz bandwidth real-time oscilloscope with 20 GSa/s sample rate available on all 4 channels simultaneously
- Up to 1 Mpts MegaZoom deep memory at 20 GSa/s and 32 Mpts MegaZoom deep memory at 2 GSa/s and slower sample rates (after-purchase memory upgrade available)
- Each InfiniiMax probe amplifier supports both differential & single-ended measurements for cost-effective solutions
- Unrivaled InfiniiMax probing accessories support browsing, solder-in and socket use models at maximum performance
- The 3.5 GHz InfiniiMax 1131A probe and E2668A/E2669A connectivity kits (all sold separately) are recommended for the Infiniium 54853A oscilloscope
- New removable hard disk drive option (opt. 017)
- Multiple software analysis options including EZJIT, Time Interval and Jitter Analysis, High-Speed Serial Data Analysis, and more
Technical Specifications
| Form Factor |
Rackmount (/1CM) |
| Bandwidth |
2.5 GHz |
| Channels |
4 Ch |
| Sample Rate |
20 GSa/s |
| Type |
Digital |
Available Options
| Option Code |
Description |
| 001 |
1M Memory/CH Upgrade |
| 002 |
EZJIT jitter analysis software package for Infiniium 54853A (installed) |
| 003 |
Serial Data Analysis software for Infiniium 5485xA oscilloscopes (installed at the factory) |
| 004 |
EZJIT Plus software |
| 006 |
Application Integration Package (Installed) |
| 017 |
Removable hard drive for Infiniium 54850 series oscilloscopes |
| 018 |
Standard hard drive for Infiniium 54850 series oscilloscopes |
| 021 |
Low-Speed SDA (installed) |
| 1131A |
INFINIMAX 3.5 GHZ PROBE AMP |
| 1CM |
Rackmount Kit |
| A6J |
ANSI Z540 compliant calibration with test data |
| ABJ |
Japan Quick Users Guide (Japanese localization) |
| E2681A |
JITTER ANALYSIS SW |
| RMKT |
Agilent Refurbished Product (Do Not Use - Certiprime Option) |
Our Service Commitment
- One-stop service from manufacture to shipping
- Your inquiry related to our products or prices will be replied within 24 hours
- Well-trained and experienced staff to answer all your inquiries in fluent English
- Distributor support offered for your unique design and some of our current models
- Protection of your sales area, design ideas, and all your private information