World´s widest range of single-connection measurement applications
 
 The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.
 
 Replace racks and stacks
 
 Reduce your equipment count by replacing racks and stacks of equipment with the PNA-X.
''X-parameters'' is a registered trademark of Agilent Technologies. The X-parameter format and underlying equations are open and documented. For more information X-Parameters Open Documentation, Trademark Usage & Partnerships
| 008 | Pulsed-RF Measurements | 
| 010 | Time-domain measurements | 
| 020 | Add IF inputs | 
| 021 | Add pulse modulator to internal first source | 
| 022 | Add pulse modulator to internal second source | 
| 025 | Add four internal pulse generators | 
| 028 | Noise figure measurements using standard receivers | 
| 080 | Frequency offset measurements | 
| 081 | Reference Channel Switch (Adds internal switch to R1 Path)(Standard Option w/080) | 
| 082 | Scalar calibrated converter measurements | 
| 083 | Vector and scalar calibrated converter measurements | 
| 084 | Embedded LO measurements | 
| 086 | Gain compression measurements | 
| 087 | Intermodulation distortion measurements | 
| 088 | Source phase control | 
| 118 | Fast CW mode | 
| 1A7 | ISO 17025 compliant calibration | 
| 1CM | Rack mount kit for installation without handles | 
| 1CP | Rack mount kit for installation with handles | 
| 200 | 2 ports, single source | 
| 219 | Add extended power range and bias-tees to 2 port analyzer | 
| 224 | Add internal second source, combiner and mechanical switches to 2-port analyzer | 
| 29 | Corrected noise figure measurements | 
| 301 | Application for use with standard CalPods | 
| 302 | Application for use with temperature-characterized CalPods | 
| 400 | 4 ports, dual source | 
| 417 | 4-port dual source extended power range | 
| 419 | Add extended power range and bias-tees to 4 port analyzer | 
| 423 | Add internal combiner and mechanical switches to 4-port analyzer | 
| 460 | Integrated true-mode stimulus application | 
| 510 | Nonlinear component characterization | 
| 514 | Nonlinear x-parameters | 
| 518 | Nonlinear pulse envelope domain | 
| 520 | Arbitrary load impedance X-parameters | 
| 551 | N-port calibrated measurements | 
| 897 | Built-in performance test software for Agilent inclusive calibration, perpetual license | 
| 898 | Built-in performance test software for standards compliant calibration, perpetual license | 
| A6J | ANSI Z540 compliant calibration | 
| H85 | Removes bias tees between source attenuators and test port couplers | 
| N1966A | Pulse/IO Adapter | 
| N8981A | Spare hard drive for use with 1.1 GHz Pentium M CPU board Recommended for use in secure environments | 
| PS-S10 | Remote scheduled productivity assistance. Select 1 to 999 hours. | 
| PS-S20 | Startup assistance | 
| PS-S20-01 | Recommended Startup assistance | 
| PS-T10-PNA | PNA operator training for 8 students at the customer's site , H7215B-203 | 
| PS-T12-PNA | PNA programming for 8 students at the customer's site , H7215B-204 | 
| R-50C-011-3 | Agilent Calibration - 3 years | 
| R-50C-011-5 | Agilent Calibration - 5 years | 
| R-50C-016-3 | ISO 17025 Compliant Calibration - 3 years | 
| R-50C-016-5 | ISO 17025 Compliant Calibration - 5 years | 
| R-50C-021-3 | ANSI Z540-1-1994 Calibration - 3 years | 
| R-50C-021-5 | ANSI Z540-1-1994 Calibration - 5 years | 
| R-50J-001-3 | Onsite System Verification - 3 years | 
| R-50U-001-3 | Onsite Agilent Calibration - 3 years | 
| R-50U-002-3 | Onsite ANSI Z540-1-1994 Calibration - 3 years | 
| R-51B-001-3C | Return to Agilent Warranty - 3 years | 
| R-51B-001-5C | Return to Agilent Warranty - 5 years | 
| R-51B-001-C | Return to Agilent Warranty - 1 year | 
| R-51C-001-1CU | Onsite Warranty - 1 year | 
| R-51C-001-3CU | Onsite Warranty - 3 years | 
| UK6 | Commercial calibration certificate with test data | 



