Important Notes
Horizontal scale: wavelength display mode
At 23±5°C, with 10/125 µm single mode fiber, after 2 hours of warm-up, after optical alignment with built-in reference light source
After wavelength calibration with built-in reference light source
Vertical scale: absolute power display mode, resolution setting: 0.05 nm or wider, resolution correction: OFF
With 10/125 µm single mode fiber (B1.1 type defined on IEC60793-2, PC polished, mode field diameter: 9.5 µm, NA: 0.104 to 0.107)
Temperature condition changes to 23±3°C at 0.05 nm resolution setting
High dynamic range mode: OFF, pulse light measurement mode: OFF, TLS sync sweep: OFF, resolution correction: OFF
Span: any 100 nm or less, measurement data point: 1001, average number: 1
High dynamic range mode: SWITCH, resolution correction: OFF
Excluding feet and handles
Liquid crystal display may include few defective pixels (within 0.002% with respect to the total number of pixels including RGB). There may be few pixels on the liquid crystal display that do not emit all the time or remains ON all the time. Note that these are not malfunctions.