Introduction
Polyethylene micro-powder is used in offset printing inks, inner printing inks, wood
lacquers, tinplate printing paints, hardware baking paints and plastic paints to improve
smoothness, scratch resistance and wear resistance. It has good printability, high gloss and
good transparency.
This additive can be used in food contact application scenarios.
Physical Property
Properties | Units | Values |
Appearance | --- | Micro-powder compounds |
Melting point | ℃ | 120 |
Density (20 °C) | g/ml | 0.95 |
Particle size distribution (laser diffraction, volume distribution) | µm | D50: 5 |
pH | --- | 7-9 |
Ionic property | --- | nonionic |
Performance Features
This additive can enhance smoothness in coatings and inks, improve scratch resistance,
wear resistance, high-temperature water boiling resistance, and has good transparency
Packaging and Storage Condition
25kg/bag
This product is temperature-sensitive and should be stored and transported at temperatures below 60 °C.
Add amount and use method
Suggested dosage
0.3- 2% additives (purchased form) are based on the total formula.
The above recommended addition amounts are for reference only. The optimal addition amount
needs to be determined through a series of tests.
Special Tips
This material is complied according to our existing technology and experience, the technical
advice provided is sincere, but it is not guaranteed to be used in all samples and formulations,
all the data are for users reference only.