Comparison between Meklon's black paint and other black paints

1. Dual system coverage (1K/2K optional), suitable for multiple scenarios

Ordinary black paint: mostly in a single system (such as only 1K or only 2K), limited in usage scenarios.

Meklon's advantages:

• 1K system: single component, ready to use, fast drying (10-30 minutes for surface drying), suitable for temporary repair and low-cost needs (such as covering small scratches on used cars);
• 2K system: two-component (main paint+curing agent), forming a dense paint film through chemical cross-linking reaction, with higher hardness (pencil hardness 2H-3H), wear and scratch resistance, suitable for high temperature environments (such as around the engine compartment, near the exhaust pipe) and long-term use of body paint.

2. Outstanding high temperature resistance (tolerance to 200 ℃+), far exceeding conventional standards

Ordinary black paint: usually has a temperature resistance of ≤ 120 ℃ (such as ordinary car paint that is prone to softening and fading near high-temperature components).

Meklon's advantages:

• By using high-temperature resistant resin and special additive formula, it can withstand high temperatures of 200 ℃ -300 ℃ (such as engine hood, brake calipers, exhaust pipes, etc.) without discoloration or detachment after coating in high-temperature areas;
• Actual test case: In desert areas (direct sunlight in summer+high engine temperature), continuous exposure for 3 months resulted in no cracking, fading or yellowing of the paint film, while ordinary black paint showed obvious softening marks at the same time.

3. Ultimate blackness and glossiness (high restoration of "pure black")

Ordinary black paint: The blackness (L value) is usually ≥ 3.5 (gray or dark blue), and the glossiness is uneven (matte/semi gloss effect is unstable).

Meklon's advantages:

• Using high-purity carbon black pigment, with a blackness value L ≤ 1.5 (close to theoretical pure black), high color saturation, and visually more "deep";
• Customizable high gloss (mirror effect)/matte (low-key texture) versions to meet the needs of different car models (such as luxury car high gloss black, modified car matte black).

4. High cost-effectiveness (cost 30% -50% lower than high-end brands)

Ordinary black paint: Imported high-end brands (such as PPG and BASF) have a unit price of ≥ 200 yuan/liter (RMB), and the price of supporting curing agents/diluents is high.

Meklon's advantages:

• The unit price of 1K system is 2-5 US dollars per can, and the unit price of 2K system is 3-6 US dollars per liter of can;
• Provide "trade in" packaging discounts or bulk purchase tiered prices (such as an additional 5% discount for single orders of 500 liters or more) to reduce inventory pressure for repair shops/deal