High Transparent Yellow Resistant HS Clear Coat Varnish High Solid Car Paint Scratch Resistant
Product Description:
Clear coat
Car varnishes come in two main types: two-component high solids (HS) and medium solids (MS), as well as fluid (aerosol) varnish. Two-component HS varnish is a "solid" mixture of volatile and non-volatile substances, consisting of varnish (50-70%), hardener (20-40%), and solvent (10-15%). Two-component MS varnish is of medium hardness, with a higher proportion of solvent (30-50%) and a smaller amount of varnish (35-45%). It dries quickly and is highly resistant to scratching, but requires at least two coats for optimal results.
Physical properties
| Product introduction | High Transparent Yellow Resistant HS Clear Coat Varnish High Solid Car Paint |
| Density | 0.95 kg/L |
| Raw materials | Acrylic Resin, Additive, Solvent |
| Colors | Transparent |
| Solid content | 52%,53%,55%,60% |
Product List



Application process:
| spray gun | Gravity gun | Suction gun |
| gun nozzle: 1.3-1.5mm, gun pressure: 2.0-4.0 MPa | gun nozzle: 1.3-1.5mm, gun pressure: 1.5 - 2.0 Mpa | |
| substrate | dry 1K base coat /dry clear coat | |
| Paint preparation | clear coat, hardener: denpents on what model no.of thinner: 601/602/603 | |
| mix ratio | 1 : 0.5:(0.2-0.3) (base paint : hardener : thinner) | |
| spraying layers | 2-3 coats | |
| flash off time | 5-10 mins , 20-25℃ | |
| surface dry time | 20mins | |
| Time to Polish | 8hours | |
| Relationship between drying temperature and time of clear coat | ||
| Tenmperture | Surface Drying time | Time to Polish |
| 25℃ | 20 mins | 8 hours |
| 60℃ | 10 mins | 2 hours |
| infrared light | 5 mins | 1 hour |
Storage :
Keep in a tightly covered container and in a dry and ventilated environment,avoiding exposure in sun directly.Temperature above 10℃ is recommended,between 15 and 30 ℃ optimal.