We are a Chinese automotive paint manufacturer, my name is Sally. We were established in 2014 and have been here for 10 years.
We have a professional team, complete departments such as Research, production, sales, after-sales, etc.
Our Research team comes from PPg and has many years of experience and outstanding contributions.
| Type | 1K Young Green Pearl | |
| Substrates | Well-sanded,completely dried and good existing finishes as: A. original paint B.old paint firm C.1K or 2K primer | |
| Surface Cleaning | Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry, again with degreaser. | |
| Mixing Ratio | Basecoat | Thinner |
| <15°C | 1K Basecoat 1K Copper Pearl | 602 Fast Thinner |
| 15-30°C | 1K Basecoat 1K Copper Pearl | 602 Standard Thinner |
| >30°C | 1K Basecoat 1K Copper Pearl | 602 Slow Thinner |
| Spray Viscosity | 14-16s to drop off, in 4# viscosity cup at 25°C | |
| Re-Treatment | After Spray, allow 10-20 minutes air-drying time,then spray clear coat at once. | |
| Spray Gun Set Up | Gravity Feed: 1.2-1.5mm 3-5kg/cm² Gravity Feed: 1.4-1.6mm 3-5kg/cm² | |
| Spray Technology | Coats & Thickness: 2-3 coats, total 15-20um. Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and paint film. | |

If you are interested, you can contact me anytime
whatapp:+8613822162990