The general purpose gauge pressure transmitter is one of the most commonly used pressure measurement instruments in industrial automation. It is used to measure the pressure of gases or liquids relative to atmospheric pressure (i.e., gauge pressure) and convert the pressure signal into standard electrical signals (such as 4-20mA, 0-5V, etc.) for output. This facilitates connection with secondary instruments, PLCs, or DCS systems to achieve pressure monitoring, control, and data recording.

• Wide range of applicable media: It can measure oil, water, gas and other media compatible with 316/304 stainless steel. Some models support anti-corrosion materials such as Hastelloy and tantalum.
• High precision and stability: The accuracy is usually 0.1% to 0.5% FS, with good long-term stability, vibration resistance and shock resistance, suitable for industrial environments.
• Flexible installation: Supports various process connection methods such as threaded and flanged, compact structure, and can be directly installed on pipelines or containers.
• Diverse output signals: Standard 4-20mA (two-wire system), 0-5V/0-10V (three-wire system), and some support digital protocols such as HART and Modbus.
• High protection grade: IP65/IP67 protection, explosion-proof type available (such as intrinsically safe type Exia, flameproof type Exd), suitable for harsh environments.

• Industrial process control: Pressure monitoring of pipelines and storage tanks in fields such as petroleum, chemical engineering, power, and metallurgy.
• Machinery and equipment: Hydraulic systems, pneumatic systems, pump stations, etc.
• Water treatment and environmental protection: Liquid level/pressure measurement in water supply networks and sewage treatment.
• Food : Hygienic design (such as 316L material) to meet hygiene requirements.

1. Measurement Range: Choose the range based on the actual pressure, and it is recommended to be 1.5 times the maximum pressure.
2. Medium Compatibility: For corrosive media, select anti-corrosion materials (such as 316L, Hastelloy).
3. Accuracy Grade: For general industrial use, select 0.5% FS; for precise measurement, choose 0.1% FS or higher.
4. Environmental Conditions: For high/low temperature environments, pay attention to the temperature range (e.g., -40 to 85°C); in explosion-proof environments, select certified models.
5. Output Signal: For long-distance transmission, choose 4-20mA; for short distances or digital communication, select HART/RS485.