6W Mini Portable Nail Lamp UV LED USB Nail Dryer for Gel Polish Curing Light Tool

Product Description

6W mini UV/LED nail lamp with a foldable, pocket-size curing head. 6 LED beads, 365+405nm dual light source, 60s one-button timer. USB powered, corded. Cures base and top coat in 60s; hard gel and poly gel in 120s; liquid glue, nail stickers and nail strips in about 60s. Low heat and even curing, no bulbs to replace. Compact for travel, home DIY and salon use. Cure four fingers, then the thumb. Wipe tacky residue with cleanser or alcohol. Box: lamp, 1m USB cable, mini box.

Why Our Lamp Stands Out for Your Brand

Your customers judge a nail lamp in the first ten seconds — by the way it feels in the hand. Here is what makes this one easy to explain, easy to certify and easy to sell.

1. A PC housing that feels as light as a computer mouse The shell is made of PC (polycarbonate): strong, light and smooth. The mould is finished with clean edges — no sharp burrs, no rough seams. Held in the hand, it feels as light as a computer mouse, so the build quality shows before the lamp is even switched on.

2. Two kinds of protection built into the circuit Inside the lamp are current overload protection and anti-static protection. Overload protection guards the driver and the LED beads against power faults. Anti-static protection keeps static discharge away from the sensitive parts. Both are built in on every unit — never added as an extra.

3. Reports you can hand to any buyer The LED beads come with an EN 62471 report, and the finished lamp holds CE and EMC reports. The documents your market asks for are ready to go, so importing, listing and retailing move faster with fewer surprises.

4. Shorter curing time at the same power At the same power rating as other lamps in this class, this one cures faster. The light reaches the nail more efficiently, so a full cure finishes in less time than most same-power lamps on the market — a difference your customers notice every time they use it.

Build quality, protected electronics, real reports and faster curing. Send us your logo, colour and packaging, and we will build the lamp to match your brand.

Specifications — 6W UV/LED Nail Lamp

Electrical & Performance

Parameter	Specification	6W UV LAMP
Wattage	6W
Light source	UV + LED dual light source
Wavelength	365 + 405 nm
LED beads	6 pcs, durable, no bulb replacement
Timer	60 s, single setting, one-button control
Curing time	Base coat 60 s · Top coat 60 s · Hard gel 120 s · Poly nail gel 120 s · Rhinestone glue 60 s · Stickers / strips ~60 s
Power supply	Type C cable, 1 m; corded — requires external power, not rechargeable

Structure & Dimensions

Parameter	Specification	6W UV LAMP
Housing material	PC (polycarbonate)
Mould finish	Smooth, burr-free edges; light, mouse-like feel in the hand
Form factor	Foldable, mouse-shaped
Dimensions (unfolded)	4.49 × 2.28 × 1.89 in (≈114 × 58 × 48 mm)
Net weight	1.92 oz (≈54 g)
Available colours	White

Key Features & Benefits

The LED Bead Inside

A lamp is only as safe as its light source. This one starts with a certified bead. RG0 Exempt under EN 62471 The bead carries its own EN 62471 photobiological safety report and is classified RG0 Exempt Group — the safest class in the international standard. The light source inside your lamp is proven safe in its own right. Measured far below every limit UV came in about 250 times below the limit. Blue light about 40 times below. Retinal heat more than 2,200 times below. Skin heat around 25,000 times below. Day after day of use stays deep inside the safe zone. Steady, continuous light The bead is a continuous-wave source: smooth, even output instead of flicker — a more consistent cure from the first second to the last. Stable, low-power drive Rated 3.2–3.8 VDC / 180 mA / 1 W, and tested at its working current, so the performance you get is the performance that was measured. One certified part makes the whole lamp easier to approve Because the light source already holds an EN 62471 RG0 report, brands and retailers face fewer roadblocks when documenting a finished lamp for new markets.

The Whole Lamp

Curing gel polish means working inches away from skin and eyes. This lamp was tested as a finished product — not just assembled to look safe. Exempt Group light: the lowest risk class available The complete lamp was independently classified Exempt Group (RG0) — the safest class on the photobiological safety scale. It means one simple thing for you: no hazard from the light itself. Gentle on eyes and hands, measured — not assumed Six separate hazard categories were tested: UV, near UV, blue light, retinal heat, eye infrared and skin heat. All six came back in the lowest class. Gentle light, session after session. Wide safety margins, not a borderline pass The measured values sat far below the safe limits — UV roughly 180 times below, UVA about 500 times below, eye infrared more than 100,000 times below. Long manicures stay well inside the safe zone. No need to rush, no need to count the seconds. Comfortable while it cures The skin-heat measurement landed in the lowest class, so the lamp stays comfortable over the hand instead of forcing you to pull away. Tested as a whole lamp, not a single part Safety was measured on the finished unit, working, at a realistic distance — the product you actually receive. What the box promises is what was tested. Easy to trust, easy to show Independently tested and reported by a national-standard laboratory (CESI Guangzhou, September 2026). The report is available on request — ready for salon walls, retail listings and buyer due diligence.

We can custom for you

Make It Your Brand (Customization Service) The lamp is ready to work. The branding is where you come in. Your logo on the lamp — printed on the housing, so the product in your customer's hand is unmistakably yours. Your colour — matched to your brand palette, keeping product, packaging and marketing consistent. Your user manual — printed under your brand: your logo, your layout, your contact details. Your packaging — retail-ready boxes with your own artwork. No repacking, no covering another brand's design. One partner — send your logo, colour reference and artwork; we produce, print and pack, so your first shipment arrives ready to sell. All four on one order. MOQ and lead times on request.

Packging Display

FAQ — 6W UV LAMP

1. Is the lamp safe to use so close to skin and eyes?-- Yes. The finished lamp was independently classified Exempt Group (RG0) — the lowest photobiological risk class, and the only one that means no hazard from the light itself.
2. What exactly was tested? --Six hazard categories: UV, near UV, blue light, retinal heat, eye infrared and skin heat. All six came back in the lowest class, with measured values far below the safe limits.
3. What light source is inside the lamp? --A continuous-wave LED bead, model M5054 BL-QT, rated 3.2–3.8 VDC / 180 mA / 1 W and classified RG0 Exempt under EN 62471 in its own right. The lamp itself is rated 6W.
4. How is the lamp powered? --It runs from USB-Type C power, so any USB-Type C adapter, power bank or laptop can drive it.
5. Does it cure gel polish? --Yes ,it is built for UV/LED gel systems. Curing time depends on the gel brand, so follow the instructions supplied with your polish.
6. What protects the lamp itself?-- The board carries current overload protection and anti-static protection,
7. Can I order it with my own branding? --Yes. Your logo on the lamp housing, your colour, your user manual and your packaging box — all on a single order. MOQ and lead times on request.
8. How do I get a sample or the test reports? --Contact us with your requirements and we will send both.