02311KNU QSFP28-100G-LR4 100G QSFP28 Transceiver 100GBASE LR4 10KM SMF LC DOM

Description Of Fiber Optic Transceiver

Huawei Cloud Engine switches are popular for application in campus & data center networks. The fast development of 5G & IoT generates explosive data within the enterprise data center and drives increasing demand on high performance, high bandwidth and low latency agile networks. 100G Ethernet gradually becomes the mainstream network architecture and 400G Ethernet at the corner.

Top-Trans QSFP28 100G Module is designed for 100GBASE archictecture. This QSFP28 LR4 transceiver uses LAN-WDM DFB transmitter and PIN receiver to create the 100Gigabit connection via the fiber link over up to extended distance of 10km via the SMF. This QSFP28 module features the LC Duplex connector which can interoperate with other QSFP28 LR4 optics. This QSFP28 module is fully MSA compliant and features the online DOM/DDM to monitor the operation status. This QSFP28 module can be programmed with the compatibility to interoperate with Huawei QSFP28 ports.

Specification Of Fiber Optic Transceiver

Feature Of Fiber Optic Transceiver

• Hot pluggable QSFP28 MSA form factor

• Compliant to IEEE 802.3ba 100GBASE-LR4

• Up to 10km reach for G.652 SMF

• Single +3.3V power supply

• Operating case temperature: 0~70℃

• Transmitter: cooled 4x25Gb/s LAN WDM EML TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)

• Receiver: 4x25Gb/s PIN ROSA

• 4x28G Electrical Serial Interface (CEI-28G-VSR)

• Maximum power consumption 3.5W

• Duplex LC receptacle

• RoHS-6 compliant

​Compatible platform

Huawei CE5800 CE6800 CE7800 CE8800 CE9800 CE12800 CE16800 S12700E Switches

Application of Fiber Optic Transceiver

• Data Center Interconnect

• 100GBASE-LR4 Interconnect

​

QSFP28 Transceiver List

FAQ

• Can I use your QSFP28 module with Huawei original 02311KNU QSFP28-100G-LR4 optics?

Yes, It can interoperate with Huawei optics

• What's your optic warranty terms?

​

1 year free replace, 3 years free repairment for non-human made hardware defects

• What if I find your optics are not satifiying with our fiber link, occurs critical signal losses?

Our optics is made by fresh new components through the strict QC control on digital & optical parameters, performance and reliability test through error detector, eye diagram and Industrial Oven. The qualification ratio is over 99.9%. If any quality defects occurs within the warranty, we will arrange the replace/repair service immediately.