Good Quality Factory Directly White-Yellowish Solid Reactive PUR Hot Melt Adhesive WANLI® PUR-XBB651 with Open Time About 20 Minutes at 25℃ for LCD (Liquid Crystal Display) Bonding, Perfect Bonding Strength

Wanli® PUR hot melt adhesive PUR-XBB651 for electronics liquid crystal display panel bonding is a single-component reactive PUR hot melt adhesive with 100% solid content. It can be used for self-adhesion and mutual adhesion of PC, ABS, PVC and other plastics and aluminum, stainless steel and other metals. It is featured stable viscosity under heating at a certain temperature, high initial bonding strength, final bonding strength and long open time. After curing, it has good peeling strength, good heat&humidity resistance and chemical resistance. It is especially suitable for bonding applications in the electronic industry.

APPLICATION
Wanli® PUR hot melt adhesive PUR-XBB651 is used for electronics liquid crystal display panel bonding. It can be used for self-adhesion and mutual adhesion of PC, ABS, PVC and other plastics and aluminum, stainless steel and other metals. It is especially suitable for bonding applications in the electronic industry.

FEATURE
Stable viscosity under heating at a certain temperature.

High initial bonding strength, final bonding strength and long open time.

After curing, it has good peeling strength, good heat&humidity resistance and chemical resistance.

USER GUIDE
The package of PUR-XBB651 is suitable for various dispensing equipment. The recommended operating temperature is about 110℃. In order to achieve complete curing, it is better to place finished product in a working environment with suitable temperature and humidity (recommended temperature: 23~25℃, about 65% relative humidity).

STORAGE
Store the product where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.