China Hot Sale Innovative Design Hot Melt Adhesives For Car Floor Mats Bonding WIth High Performance
TPR-7212BW
Wanli® pressure sensitive hot melt adhesive TPR-7212BW for automotive interior trim is a TPR (thermoplastic rubber) synthetic rubber based hot melt adhesive.TPR-7212BW was developed specifically for automotive floor mat veneer. TPR-7212BW has high viscosity, high peel strength, and good aging resistance.
APPLICATION
Wanli® PSA pressure sensitive hot melt adhesive TPR-7212BW is suitable for the lamination of car floor mats.
| Application Material | Car Floor Mats Lamination Bonding |
| Appearance | Yellowish Solid Block |
| Component | TPR |
| Application Industry | Vehicle Interior Decoration |
| Solid Content | 100% |
| Operating Temperature | 160~185 ℃ |
| Softening Temperature | About 124℃ |
| Melt Viscosity | About 16000mpa·s (180℃) / About 45000mpa·s (160℃) |
| Peeling @180˚ | ≥30N/2.5cm/65μm/ Stainless Steel Plate |
| Ring Initial Viscosity | ≥25N/2.5cm/65μm |
| Lasting Adhesive | ≥120H |
| Usage Scope | Car Floor Mats Lamination |
| Shelf Life | 1 Year |
| Package | 20Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
TPR-7212BW is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 160℃~185℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store TPR-7212BW where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.
