Flexibility And Low Stress Transparent PU Potting Compound For Automotive

BZ-708-5-2 is a transparent, flexible, and highly adhesive two-component polyurethane potting compound. It features excellent processing performance and rapid curing speed, making it ideal for waterproofing automotive tire pressure monitoring modules, sensors, and LED modules.

1. Two-component polyurethane with convenient process operation and moderate fluidity.
2. Complies with ROHS.
3. The material exhibits excellent flexibility and superior vibration resistance, effectively protecting electronic components.
4. It maintains strong adhesion with both common plastics and metal materials.

1. Tire Pressure Monitor:High adhesion, flexibility, and excellent vibration resistance
2. Sensor: Transparency, flexible, resistant to high and low temperature shocks, suitable for various application scenarios.
3. LED modules:Tolerant to high and low temperature changes, good flexibility, low stress

1. Pre-potting Preparation: Calibrate scales, prepare potting tools, cleaning tools, check machine settings, check vacuum pump force, etc.
2. Product Pre-treatment: Place product on a level surface or fixture. Remove dust, clean, degrease, and dry if necessary.
3. Accurate Proportioning: Manual operation requires precise mixing according to the specified ratio and recording. Machine potting requires calibrated ratios and first-article confirmation is recommended.
4. Mixing & Stirring: Manual operation requires thorough stirring or using electric stirrers to ensure homogeneous mixing. Machine potting requires sufficient stirring speed, adjust as needed.
5. Uniform Potting: Manual operation should be done in small, multiple batches to ensure uniformity. Machine potting should follow the programmed path for quantitative dispensing.
6. Inspection or Secondary Potting: After potting, visually inspect as needed. Perform touch-up, bubble removal, or secondary potting if required.
7. Curing: Allow the potted and inspected products to cure at room temperature or with heat assistance (recommended 60°C if needed), according to product and process requirements.
8. Final Product Confirmation: Perform visual inspection and performance testing as required by the customer.

1. Hardener: Typically 5KG/ 10KG / 20KG/ 200KG metal or plastic drums.
2. Resin: Typically 5KG/ 10KG / 20KG / 200KG metal or plastic drums.
3. Store and transport as a general chemical product.
4. Store sealed, protected from light at room temperature. Shelf life varies from 6 to 12 months depending on packaging; please refer to the expiry date on the shipping package.
5. When temperature drops to 15°C or lower, the hardener or resin should be stored in a warm place or heated before use for potting. Specific heating recommendations depend on the temperature drop; please communicate and consult with us.