32 inch optical bonding LCD and capacitive touch panel for advertising machine
1 |
Type |
Projected capacitive touch panel |
2 |
VA of cover lens |
699.4*393.84mm |
3 |
OD of cover lens |
757.12*450.6mm |
4 |
AA of ITO sensor |
700.92*395.58mm |
5 |
OD of ITO sensor |
732*421.47mm |
6 |
Controller board |
ILItek |
7 |
Working environment |
-10℃-60℃ |
8 |
Storage environment |
-10℃-65℃ |
9 |
OS supported |
Win7, Win8, Win10, XP, Android, Linux, WCE |
10 |
Ball drop test |
500g stell ball, falling from height of 1.3m, no breakage |
Features of optical bonding products
- Since there is no gap between LCD and touch panel after assembly, dust and fog can't go inside the module.
- There will be low interference of LCD to touch panel.
- Vivid and clear crystal display performance than ordinary bonding method.
- Improved strongness, vibration resistance of TFT module.
Development process of optical bonding products.
- Recommend suitable touch panels based on customers' requirements.
- Receive customer's LCD samples and evaluate LCD structure and check the thickness of LCD bezel sheet.
- Offer quotation for customer's confirmation.
- Samples are prepared for confirmation.
- Trial production.
- Mass production.
Lead time
for samples
- Touch panel: 15 days after PO.
- Optical bonding: 3-5 days after touch panels and LCD get ready.
for mass production
- Touch panel: 18 days after PO.
- Optical bonding: 5-8 days after touch panels and LCD are made.
Shipment method
DHL, UPS, FedEx, TNT, Aramex etc.