Lithium Battery Nail Penetration Test Equipment Of The 2.2KW SUS304
Specification
| Display | PLC Touch screen display |
| Electric control | Controlled by PLC program |
| penetration mode | vertical direction |
| steel nail diameter | 2mm~10mm, 20mm for option |
| Inner box material | SUS304 stainless steel, iron and fluorine melted tape attached to the box, insulated, high temperature and flame resistant, easy to clean and maintain |
| Outer box material | Cold rolled sheet baking treatment |
| Exhaust device | Located at the rear of the cabinet, exhaust fan, duct diameter 120mm, length 100mm, convenient to connect with external laboratory high-power exhaust fan |
| Test mode | Single test |
| Observation window | tempered glass explosion-proof observation window, the size is 250*250*5mm, and with iron gauze between the glass in case of battery explosion splash and avoid to injury operator. |
| Protective device | Safety door switch, Automatic sensor door, the door closed when start to test, opened after testing finished |
| Max. Battery tested size | 300*300*100mm (L*W*H) |
| Using electric | AC220V±10%, 10A 50Hz 1phase |
| Power | 2.2 kW |
| Weight | About 320kg |