Laptop Lithium Battery Washing Test Machine/ Equipment
Specifications:
| Temperature controller | |
| Temperature range | 0℃~100℃; |
| Resolution accuracy | ±0.1℃; |
| Temperature fluctuation | ±0.5℃; |
| Temperature uniformity | ±2℃; |
| Limit of low temperature | 0℃; |
| Heating rate | Average 3℃/min(from 0℃to 100℃,no-load nonlinearity) |
| Cooling rate | Average 1℃/min(from 100℃ to 0℃,no-load nonlinearity) |
| Internal dimension | W500×H600×D500mm |
| Internal box material | #304 stainless steel , reinforcement at the bottom |
| Outward volume | W1050×D 1500×H2100mm |
| Power | 1∮,220V/50HZ |
| Weight | About 150KG |
| Short circuit test | |
| Test load | Generally 80kg (max of 100kg) |
| Load resolution | 1/10000 |
| Unit change | kg, lb,N |
| Load accuracy | ≤0.5% |
| Strength maximum multiples | 7 paragraphs, automatically switch |
| Displacement resolution | 1/1000 |
| Displacement accuracy | ±0.05 mm |
| Speed range | 0~20mm/min adjustable, generally 0.1mm/s(6 mm/min) |
| Valid stroke | 100mm(not including the fixture) |
| Test plate | 200×200mm(can customize) |
| Voltage acquisition range | 0~20V |
| Voltage resolution | 0.1mV |
| Voltage acquisition frequency | 100 times per second |
| Working table material | Stainless steel with Teflon tape |
| Short circuit pressure head size | Cylindrical battery:10*10*15mm stainless steel+ 10*10*2mm NBR Square or prismatic battery:10*10*15mm stainless steel + 10*10*2mm NBR +5*5*2mm acrylic |
| Pressure head material | NBR: 10mm x 2mm, Acryl: 5mm x 2mm) |
| Pressure direction | From upper to lower |
Description:
The tester is designed according to the JIS C 8714:2007 and IEC62133 standard to simulate the forced short circuit under the predetermined environmental conditions. The stainless steel testing box can provide great temperature uniformity.
Picture:
