B5L24-67901 RM2-6576-000CN Transfer Belt (ITB) for HP Color LaserJet Enterprise Flow MFP M577 M552 M553 M578 E55040 Printer Transfer Unit Kit
Premium Transfer Belt Unit for Flawless Color Prints
Are your Color LaserJet prints missing colors, full of vertical white streaks, or marred by repeating color spots? These common problems are often the result of a worn or damaged Intermediate Transfer Belt (ITB). The ITB helps move toner from your cartridges to your paper, and you must replace it when necessary to maintain your professional print quality.
Compatible with part numbers B5L24-67901, RM2-6576-000CN. Designed to meet the demanding applications of HP Enterprise and Managed printers. Keeps paper moving smoothly and colors lining up precisely.
Compatibility List
This Transfer Belt Kit is designed for the following HP Color LaserJet models:
- HP Color LaserJet Enterprise M552 series
- HP Color LaserJet Enterprise M553 series
- HP Color LaserJet Enterprise Flow MFP M577 series
- HP Color LaserJet Enterprise M578 series
- HP Color LaserJet Managed E55040 series
- HP Color LaserJet Managed MFP E57540 series
Handling Instructions
- Do not touch the gray or black surface of the belt because of possible skin oils or fingerprints. Serious print quality problems can occur.
- Avoid light exposure. Do not leave the belt exposed to direct sunlight or in strong room light for an extended period, since this light will damage the photosensitive properties of the belt.
- Remove all packaging before use. Orange protective clips, tapes, and packaging material must be completely removed before installation. Failure to do so and attempting to turn on the printer will destroy it.
Basic Replacement Procedure
- Power off the printer.
- Unplug the power cord and wait for the cooling to complete.
- Open the printer's right-side door.
- Unlock the ITB and remove the old unit. Slide the replacement B5L24-67901 unit into the spot until it clicks.
- Close the printer door and plug it back in, printing a configuration page to check.