20 Digits Token IP54 3 Phase Energy Meter Three Phase Energy Meter
20 Digits Token Three Phase Energy Meters , Low Credit Warning Tamper Protection
The CA368 is a three phase four-wire, compact design  keypad based and STS token operated prepayment meter. It is  in a compact BS housing and extrended transparent terminal cover. The meter is manufactured by  ISO9001 standard with IP54 protection rating. Thanks to a wide range of power supply ( Un -40% +20%) and improved RF immunity withstand of 30V/m,  it can operates in harsh environments.
 
The CA368 is ideal when separating accommodation; i.e. flats, apartments, houses offices where you have only one power supply. It is usually very expensive to pay a utility company to add extra supplies. Tiger Meters offer a low cost alternative and it allows you to keep control of your electricity usage.
 
Main Features
 
• 20 digits Token code topup
• Up to 13kV/6.5kA surge protection for lightening and other line surges
• IR optical & RS485 port allowing for easy data interrogation
• Shut off when credit finishes
• Programmable power limit and low credit warning
• Tamper detection and event record such as opening cover, reverse connection, black-out
• Dual power source working on both prepayment and credit mode
• Maximum demand measurement and load profiling (on request)
 
 
User Benefit
 
• Easy to install for both new reticulation and retrofitting due to BS mounting
• Low operational and inventory cost
• Can be ordered with PLC/ RF/ GPRS/GSM communication for AMR/AM I features
• Meter provides various valuable information by punching in Calin's short codes
• instant investment back, debt collection
 
Specifications:
 
|   Electrical parameters:  |    Electro Magnetic Compatibility  |    |  |
|   Nominal voltage Un  |    3x240 voltage  |    Electrostatic discharges  |    |  
|   Limited voltage  |    60%~120%Un  |    Contact discharge  |    8kV  |  
|   Frequency  |    50/60Hz+5%  |    Air discharge  |    16kV  |  
|   Basic current(Ib)  |    10A  |    Electromagnetic RF fields  |    |  
|   Maximum current(Imax)  |    100A  |    27MHz to 500MHz typical  |    10V/m  |  
|   Starting current(Ist)  |    30mA  |    100kHz to 1GHz typical  |    30V/m  |  
|   Active energy constant  |    400imp/kWh  |    Fast transient burst test  |    4kV  |  
|   Accuracy  |    |    Mechanical requirements  |    |  
|   Active energy to IEC62053‐21  |    Class1.0  |    Protection Rating  |    IP54  |  
|   Reactive energy to IEC62053‐23  |    Class2.0  |    Insulation Classification  |    Protective Class II  |  
|   Power Consumption  |    |    Maximum cable size  |    10 mm  |  
|   Power consumption in Voltage circuit  |    <2W <8VA  |    |    |  
|   Power consumption in current circuit  |    <1VA  |    |  |
|   Temperature range  |    |    |  |
|   Operation meter  |    25 to+70℃  |    |  |
|   Storage  |    40 to+85℃  |    |  |
|   |    |  ||
|   Insulation strength  |    |  ||
|   AC Insulation strength  |    4kV at 50Hz during 1min  |    |  |
|   Impulse voltage 1.2/50μs mains connections  |    8kV  |    |  |
