Type

External

Internal

Weight (kg)

Length

Width

Height (package)

Height (assembled)

Length

Width

Height

20’

6055

2435

648/864

2591/2790

5860

2240

2500

from 1850

Steel frame

- made from cold rolled, welded steel profiles, 4 mm thick

- 4 corner casts, welded

- 2 fork lift pockets (except 30’) - distance 1200mm

(internal clearance of fork lift pockets: 240×80 mm)

- steel cross members, thickness=2mm

Insulation

- 100 mm thick Rock Wool

Subfloor

- 0.5mm thick, galvanized steel sheet

Floor

- 18mm plywood board

- 1.8mm PVC floor

- flammability class B1 - hardly combustible

- smoke density class Q1 - low smoke emission

- wear resistance factor: T level

Steel frame

- made from cold rolled, welded steel profiles, 3mm thick

- 4 corner casts, welded

- steel cross members, thickness=2mm

Roof cover

- 0.5mm thick, galvanized steel sheet

- 360 degree seaming at joint of roof panels

Insulation

- 100 mm thick Rock Wool

Ceiling

- 10 mm chipboard (V 20), laminated on both sides, white

- the chipboard complies with the emission value E1

CEE connector

- sunken in frame on short end side

Corner Post

- cold rolled 3 mm thick steel profiles screwed to the roof and floor frame

Thickness

- 50mm

External cladding

- corrugated, galvanized and coated steel sheet, 0.5 mm thick

Insulation

- 50mm thick Neopor^R EPS

Internal cladding

- corrugated, galvanized and coated steel sheet, 0.5 mm thick, Color: white (RAL9001)

Rockwool

- density:120kg/m3

- flammability class A- non combustible

- smoke density class Q1 - low smoke emission

- certificated: CE & GL

Neopor^R

- density:18kg/m3

- flammability class B1- non combustible

- smoke density class Q1 - low smoke emission

- certificated: CE & GL

Key Features of Nerpor Insulation Materials

Properties

Unit

Key DIN EN 13163

Test results

Standard

Thermal conductivity
(measured value at 10℃)

W/(m.K)

﹍

0.032

0.031

0.03

DIN EN 12667

Compressive stress
at 10% compression

kPa

CS(10)

60-90

100-120

150-200

DIN EN 826

Tensile strength

kPa

TR

≧100

≧150

≧200

DIN EN 1607

Flexural strength

kPa

BS

≧100

≧100

≧150

DIN EN 12089

Dimensional stability
23℃; 90%RH

%

DS(TH)

≦1

≦1

≦1

DIN EN 1604

Fire behavior

Euro Class

﹍

E

E

E

DIN EN 13501-1

﹍

﹍

B1

B1

B1

DIN 4102

Water absorption long-term immersion

Vol.%

WL(T)

﹍

≦3

≦3

DIN EN 12087

Water vapor diffusion
resistance index

﹍

MU

30-70

40-100

40-100

DIN EN 12086

Application limiting
temperature

℃

﹍

80

80

80

﹍

Chemical resistance

Insensitive to water, the majority of acids and alkalis, sensitive to organic solvents

Biological behavior

No harmful effects on health known

External door

- right or left hand hinged

- door blade with galvanized steel sheets on bothsides, 50mm insulation

- Alum frame with rubble sealing

- dimensions:

nominal dimensions

internal clearance

900 x 2100 mm

820 x2020mm

Internal door

(option)

- right or left hand hinged

- door blade with galvanized steel sheets on both sides

- steel frame with rubble sealing

- dimensions:

nominal dimensions

internal clearance

800 x 2000 mm

720 x1920mm

900 x 2000mm

820 x1920mm

Sliding window

- Upvc windows frame, Color: white

window dimensions:800 x1100mm

- 5mm thick clear glass

- roller up Mosquito Net, Color: white

Double glazed(5/9/5)

Casement window

- upvc windows frame, Color: white

window dimensions:800 x1100mm

- 5mm thick clear glass

- roller up Mosquito Net, Color: white

Double glazed(5/9/5)

Technical data

- sunken CEE external plug and socket connections

voltage 230/400 V (option: 110V)

50 Hz, 3/5 poles, 32 A

- circuit diagram for assembly provided inside the consumer box

- consumer box, sunken into wall panel

Distributor data

- definition according to IEC61009/GB16917.1

- residual current operated device 40A/0.03mA 2/4poles

- circuit breaker 10 A (light) 2 poles

- circuit breaker 16A (Air-condition/ heater) 2 poles

- circuit breaker 10A (sockets)2 poles

- 5 holes wall sockets(10A)

- 3 holes air-condition sockets(16A)

- light switch

- 2 tubes fluorescent light with plastic covering 2 x 36 W

Earthing

- 1 galvanized strip iron earth electrode (25 x 4 mm) with fastening. The protective earthing installation on site must be carried out by the buyer/hirer.

Prevent oxidation

- all the steel frame operated by zinc galvanized

Paint color

- RAL Color 1000

Frame

- 20-40 μm primer

40-50 μm topcoat

Wall panel

- 30μm paint thickness

DecoCoating

Special coating can be applied on top of sandwich wall panel and make the external wall surface looks like plastering finishes or timber finishes. That makes the container house cozy and less industry look.

1

Strong structure

All parts are galvanized, lifetime more than 30 years. Can be stacked up to 3 floors.

2

Waterproof Design

The Elasticity of steel structure and panels makes the house waterproof

and airtight even during the movement.

3

Modular Design

They are able to stack each other and fixed through high

tensile screws.

4

Good Insulation:

The excellent insulation material Neopor which is developed by BASF,

the famous German company.

5

Easy transport

Four flat-packed cabins can be stacked and connected as one 20’ standard

sea-transport container,no more shipper’s containers needed.

That helps the cost saving especially for the inland destination.

6

Factory quick respond

Modular design minimized and standardized parts.

That makes quick combination and respond possible.

7

Minimized site

work

The assembly only requests simple tools.That helps to save equipment cost

and labor cost.No cast-in-situ concrete slab is needed.

The original floor such as turfing will not be damaged.

8

Widely Usage

The container House could be designed as parlor, bedroom, study, locker room,

ablution room, shower room, kitchen and dining room.

*9

Deco Coating

Special coating can be applied on top of sandwich wall panel and make

the external wall surface looks like plastering finishes, granite finishes and timber finishes.That make the

container house cozy and less industry look.

*10

Internal Decoration

Emulsion paint, wall paper and ceramic tiles can be fixed towall surface

using Housespace Spacial joint glue.

That make the internal more comfortable as well.

*11

Ancillary facilities

Curtain wall, stainless steel staircase, balcony and canvas roof

can be used as well and give the cabin building a modern look.