Test equipment Integrated switching power Supply Test system ATE tests voltage current power efficiency Frequency peak power
Features of the Charger/Power Bank/Mobile Power Supply Automatic Testing System:
Open:
- An open hardware platform that allows for the addition or removal of various testing devices based on customer requirements (including devices with GPIB, RS-232, USB, and other interfaces)
- An open software platform that can be expanded with new test items and functions according to customer testing needs
- Supports simultaneous multi-lane barcode pre-scanning functionality, as well as scanning barcodes during testing, enhancing overall test speed."
Universal:
- Supports comprehensive testing for various power supplies (adapters/chargers, LED power supplies, PC power supplies, inverters, communication power supplies, etc.)!
- Complies with Energy Star and IEC 62301 measurement requirements
- Supports Manufacturing Information System (ShopFloor) interface
- Supports testing of various power supply parameters in CV, CC, CR, CP modes
- Optimized display mode, arbitrary hardware configuration combinations"
High-Speed:
- Supports simultaneous testing of multiple single-output or multiple multi-output power supplies, significantly increasing production line capacity. (The testing speed for adapters/chargers/LED power supplies is more than double that of the widely used 6000 series power supply automation systems.)
- Conducts parallel barcode scanning during testing (Bar Code Reader), greatly improving testing speed.
Test Items of the Charger/Power Bank/Mobile Power Supply Automatic Testing System:
| Test items | Test items |
| DC output voltage | Input voltage ramp |
| DC output current | Input freq. ramp |
| Peak-Peak noise | Tracking |
| Transient response time | Short circuit test |
| Transient spike | Short circuit current |
| Voltage regulation | OV protection |
| Current regulation | UV protection |
| Turn ON time | OL protection |
| Rise time | OP protection |
| Fall time | In-test adjustment |
| Hold-up time | AC cycle drop out |
| Inrush current test | PLD simulation |
| Power good signal | GPIB read/write |
| Power fail signal | 232 read/write |
| P/S ON signal | USB read/write |
| Power up sequence | TTL signal control |
| Power off sequence | Relay control |
| Effciency | Bar code scan |
| Input RMS current | Dynamic test |
| Input power | DC Current under C.V.Mode |
| Input power factor | DC : specification under C.P.Mode |