800W Power Supply Unit (PSU)
High-performance 800W power supply/transformer designed for SELV heating systems including film, paint, and carbon applications. Available in multiple output voltages with CE and UKCA certification.
Key Specifications
| Power Range |
800VA |
| Dimensions |
340 × 220 × 90 mm |
| Weight |
Approximately 11 kg |
| Input Voltage |
120V/220V/230V/240V (Customizable) |
| Output Voltage |
24V/30V/36V/42V/48V (Customizable) |
Technical Features
- Built-in isolated toroidal transformer with copper or aluminum winding
- Integrated thermistor (NTC), Class B/F insulation
- Soft Start function with zero inrush current
- 16A fuse/micro circuit breaker (B type)
- Integrated micro control unit (MCU) for intelligent operation
- All outputs switch on/off simultaneously
- Single thermostat can control multiple power supplies
Protection & Safety
- Comprehensive protection: Over voltage, over load, over heat, short circuit, wire break
- Protects both primary and each output in secondary transformer
- LED indicators: Green (Power on), Yellow (Heating), Red (Faults)
- AN cooling (fanless operation)
- Noise level: ≤35dB
- IP grade: IP20
Installation & Connectivity
Mounting: AP (on wall) | Connection: Spring-type terminal (clamp terminal)
Reliability & Service
Switch on/off cycles: >100,000 | Module & compatible design with common components | Remote problem diagnosis for fast, effective service
Certifications & Standards
Safety Standards: EN61558-1, EN61558-2-6, EN60335-1
EMC Standards: EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
Certifications: CE, UKCA