| NO. | Items | Specification |
| Input Characteristics | Input voltage | 100-240V~, 50/60Hz |
| Max. Input current | 2.5A |
| Output Characteristics | Max. Output Voltage | As below list |
| Max. Output Current | As below list |
| Battery Capacity | 1000mAh Min |
| Efficiency | 80% Min |
| Power Indication | LED=Red: In charging |
| LED=Green: Fully charged |
| Charging Supervision and Protection Mechanism | Over Voltage Protection | YES |
| Output Reverse Protection | YES |
| CC CV | YES |
| Envrionment | Operation Temperature | 32-140F |
| Operation Humidity | 20-85% |
| Storage Temperature | 40-80F |
| Storage Humidity | 10-95% |
| Mechanical | Dimension | --- |
| AC Inlet | C6 / C8 / C14 / Two Cord |
| Weight | 300G |
| Output Cable | 1.2m 2464 20AWG |
| Connector | 5.5x2.1mm (Customizable ) |
| Charge Instruction | |
| 1. Make sure your AC supply source is 100-240V and your battery pack match with the battery requirement. |
| 2. Connect the charger to the AC outlet. LED=Green: it means power on and no battery connected. |
| 3. Connect DC output to battery pack terminals. LED turn into red. It means in charging. |
| 4. When LED turns Green, the battery pack is fully charged. You can charge next battery pack or switch off the power. |
| Notice | | |
| 1. Make sure your battery voltage match with your charger. |
| 2. Always place the charger in well-ventilated, dry environment and indoor use only. |
| 3. Never charge other type batteries except Li-ION/Polymer. |
| 4. Subject to change without prior notice, please contact us for the latest information. |
| 5. Indoor used only, never expose the charger to water such as rain and splash. |
| 6. Make sure good ventilation is provided when charger operation. Never place the charger near radiator, heat register or similar heat source when in charging. |