Solid State Lighting Connector Accessories RoHS The table consolidates the technical and commercial attributes stored for this exact listing.
| Parameter | Recorded Value |
|---|---|
| Brand Name | TE Connectivity |
| Model Number | 5-2213222-1 |
| Description | Solid State Lighting Connector Accessories RoHS |
| Minimum Order Quantity | 90 |
| Packaging Details | - |
| Delivery Time | 9-11 working days |
| Stock | 3370 |
Model-specific drawings, land patterns, mating orientation, and reel specifications should be checked against the latest manufacturer document for 5-2213222-1 before PCB release.
The TE Connectivity NECTOR S series offers Plug & Socket Lighting Connector Accessories designed for wire-to-bus bar applications. This bus bar accessory, with a 3.6 mm centerline pitch, provides a 2-position connection for lighting circuits, operating at up to 125 VAC and a maximum current rating of 6 A. It is suitable for power circuit applications and features a white housing.
| Part Number | Description | Number of Positions | Operating Voltage | Contact Current Rating (Max) | Centerline (Pitch) |
|---|---|---|---|---|---|
| 5-2213222-1 | NECTOR S Plug & Socket Lighting Connector Accessories, Bus Bar, Wire-to-Bus Bar | 2 | 125 VAC | 6 A | 3.6 mm |
The product record identifies TE Connectivity as the brand and 5-2213222-1 as the model. The listing is supplied by Shenzhen ECER Network Technology Co., Ltd., an electronic-component sourcing and supply company. The supplier identity is presented separately from the product brand; this page does not imply that ECER manufactures the branded connector.
Compliance evaluation should be based on documentation that identifies the exact model 5-2213222-1, its revision, and the applicable material or product scope.
The current listing records an MOQ of 90. Confirm the final quantity break and pack multiple on the commercial quotation.
Match the reel or package label to brand TE Connectivity and model 5-2213222-1. Also compare contact count, pitch, contact orientation, and mounting style with the approved drawing and purchase order.
Use the manufacturer drawing and the agreed inspection standard as controlling documents. Inspect housing condition, contact coplanarity, plating appearance, terminal deformation, and the component interface before production release.
The listing records: -. Reels or trays should be immobilized inside rigid cartons and protected against moisture, impact, crushing, and electrostatic exposure appropriate to the component and shipping route.
Request lot identification, packing records, incoming inspection results, and any applicable manufacturer compliance declaration. Contractually required electrical or material reports should be named on the purchase order.
The listing records a lead time of 9-11 working days and stock of 3370. Both are point-in-time commercial records and should be reconfirmed before order placement.
Retain the quotation, invoice, packing list, reel-label photographs, inspection results, and nonconformance records. Any return or corrective-action request should identify the lot, quantity, observed failure mode, and test conditions.