Mobile vehicle barrier that save livesr Portable Vehicle Barrier Aluminum alloy Traffic yellow

The mobile vehicle barrier is suitable for urban road construction. Its function is equivalent to the barrier that we often see on the road can divide the area. It's not just a roadblock, it's a device that forces vehicles entering the work area to stop within a short distance. And the effect is very significant.

Product Specifications Table

The mobile vehicle barrier has been tested in Japan. The figure below shows a 4-ton car hitting our device at 60 kilometers per hour, and the car was forced to stop 8.7 meters from the impact point.

Stopping Principle

When a vehicle collides with the device, its internal lever mechanism converts the vehicle's forward impact force into an upward lifting force, raising the front of the vehicle.

This process works as follows:

1. Dissipates Energy: The impact force is directed into the ground, dissipating most of the energy.

2. Frictional Braking: The remaining energy is absorbed by the wear-resistant rubber pad at the base of the device through strong friction, bringing the vehicle to a stop.

3. Cushioning Protection: The buffer modules at the base absorb the final impact forces, protecting both the vehicle and the device.

It uses a clever "lift, dissipate, and friction" approach to bring the vehicle to a smooth and controlled stop, rather than relying on a rigid, direct collision.

Product Advantage Comparison

Compared to traditional barriers, the core advantages of the RMHs Small Parking Device lie in its integrated design of "Safety, Intelligence, and Efficiency":

• For Managers: It enhances work efficiency and flexibility, enabling rapid response and low-cost deployment.

• For On-site Personnel & Drivers: It provides a higher level of safety protection, reducing accident injuries through active cushioning mechanisms.

• From a Total Cost Perspective: While the initial purchase cost may be higher than common traffic cones, its long lifespan, reusability, and low transport/storage costs give it a significant Total Cost of Ownership (TCO) advantage in long-term use. It is an ideal solution for modern, high-standard temporary traffic control and area protection.

Special rubber at the bottom of the product:

You can according to the actual use, increase or decrease the number of units.

Quick Procurement Guide

1. Consider the Scenario

• Need to block vehicles (e.g., at a construction site entrance): Choose this type of energy-absorbing interception device.

• Only need a warning (e.g., to guide traffic flow): Standard traffic cones will suffice.

2. Check Key Features

• Safety: Ask about the stopping principle. Choose a product that can stop vehicles "gently" by absorbing energy.

• Convenience: Make sure it has wheels and is foldable. Ideally, it should be operable by one person.

• Durability: Choose models made of aluminum with outdoor-grade coating—they are lighter and more rust-resistant.

• Visibility: The color should be bright (e.g., engineering yellow). Adding LED lights for nighttime use is highly recommended.

3. Calculate Total Cost
Don't just look at the purchase price. This type of product lasts for years, saving you money on搬运 machinery, storage space, and repeatedly replacing cheap cones. It's more cost-effective in the long run.

4. Ask About Service
Find out the warranty period and if there are any successful case studies.

Quick FAQ

Q1: Can this thing really stop a car? Will it damage the vehicle?
A1: Yes. It uses a "lift and friction" method to bring the vehicle to a gradual stop, not a rigid collision, which helps minimize damage.

Q2: It weighs 25kg. Is it easy for one person to handle?
A2: Yes. It has wheels and is foldable. One person can easily pull it, set it upright, and move it around.

Q3: Will it rust in the rain? Is it visible at night?
A3: Made of aluminum with anti-rust coating, it is highly rust-resistant. The yellow color is very visible, but adding LED lights for nighttime use is strongly recommended for added safety.

Q4: What are its advantages over concrete blocks or plastic cones?
A4:

• Vs. Concrete Blocks: Much lighter and more flexible. One person can handle it, greatly improving efficiency.

• Vs. Plastic Cones: It can actually stop a vehicle, not just get knocked over. It's also more durable.

Q5: What else should I buy with it?
A5: Mainly consider LED warning lights (essential for night use) and any connectors needed if using multiple units together.