Nonlinear normal power 0.15 m junction Detector 3.7V 7800mah
Introduction
The non-linear Junction Detector HW-24 analyzes the 2nd and 3rd harmonics reflected from the target to ensure the rapid and reliable identification of electronic components and corrosive semiconductors.Automatic adjustment of detection emission power.The non-linear junction detector can automatically adjust the optimal reception frequency to avoid interference from external noise, thus ensuring good results in complex geomagnetic environment.

Specification
Sensitivity | Not less than -120dbm | Modulation mode: | Pulse signal, continuous wave signal; | Output power | Pulse mode:15W; Continuous wave mode : 4W; | Display panel | Display 2nd and 3rd harmonics and sensitivity; | Volume | Volume can be adjusted and can be connected to external headphones | Detection range | Normal power: 0.15 m; maximum power: 0.4 m; | False alarm rate | ≤5% | Signal frequency | 2400 - 2483 MHz | Working time | Pulse mode: 5 hours, Continuous wave mode: 1.3 hours; | Battery parameters | 3.7V 7800mah; | Charger parameters | Input AC100-240V, Output DC 4.2V 3A; | Host size | Length 470mm unfolded, 285mm folded;Width of 128 mm; | Working environment | humidity ≤90%;Temperature -5 ° C to 50 ° C | Weight | less than 1000 g | |






