Get powerful forward bladed centrifugal fans and industrial exhaust fans for efficient airflow solutions built for durability and optimal performance in demanding environments.

• Model No4A to No6A of JQZ cut paper fan consists of a casing, air inlets, and a direct motor.
• The impeller of this forward bladed centrifugal fan is made of special gear steel, which can make the paper smaller and smaller.
• This industrial exhaust fan can collect and cut the paper edge into pieces, then transport it by air to dumps so as to improve the operating environment.
• The air transported shall not be corrosive and flammable with a temperature no greater than 80℃, and shredding thickness shall not exceed 350g/m3.

  JQZ Model Features

  Material Properties

  Featured by high efficiency, low noise, wide use, and steady pressure curve, these kinds of industrial exhaust fans were developed and produced by our factory after we observed the paper and carbon industry and how to cut and transfer the paper easily. It is easy to collect paper after it is cut with the high-efficiency preference. Big air volume and high pressure.

  Benefits

  This forward bladed centrifugal fan can be used in many factories which have some paper that needs to be made up together.

  Fan Structure

  No.4A and 6A are acceptable when the paper transportation is not so big. We can offer big air volume fans with belief driven6.8C if needed. On the air inlet of the fans, there are 4pcs knives helping the paper to enter the fans easily.

  Model	Power (KW)	Voltage (V )	RPM (r/min)	CMH(m³/h)	Pressure(Pa )
  4A	3	380	2900	821～2487	2669～1467
  4.5A	5.5	380	2900	1169～3542	3378～1856
  5A	11	380	2900	1604～4858	4170～2291
  5.5A	18.5	380	2900	3148～7800	4608～2153
  5.7A	22	380	2900	3472～9346	4953～2906
  6A	30	380	2900	5505～11592	6233～3331
  6.8C	15	380	2130	4477～7202	4204～3514
  	18.5	380	2130	7942～8675	3258～2997
  	22	380	2130	8240～10000	3250～2900
  	30	380	2450	8499～10415	4310～3698
  	37	380	2450	8672～11680	4487～3850

• Q1: What is the main application of the JQZ fan?

  A1: It is specifically designed for collecting, cutting, and conveying paper scraps and trimmings from carton and box manufacturing processes.
  Q2: What conditions can the conveyed gas meet?

  A2: The conveyed gas should be non-corrosive and non-flammable, with a temperature not exceeding 80°C and a shredding thickness not exceeding 350g/m³.
  Q3: What drive options are available?

  A3: The series includes both direct-drive (Type A) and belt-driven (Type C) configurations.
  Q4: How do I choose the right model for my application?

  A4: Consider the required airflow, pressure, conveying distance, and drive configuration. The series offers a wide range of models with different capacities.
  Q5: Is the fan suitable for continuous operation?

  A5: Yes, the fan is designed for long-term continuous use in industrial environments.
  Q6: What maintenance is required for the JQZ fan?

  A6: Regular cleaning of the impeller and casing, as well as periodic checks of the motor and belt drive system (for Type C models), are recommended to ensure optimal performance.
  Q7: Can the fan handle wet or adhesive paper scraps?

  A7: No, the fan is designed for dry, non-adhesive paper scraps. Wet or adhesive materials may cause clogging.
  Q8: What certifications does the JQZ series have?

  A8: The series meets international quality standards. CE-certified versions are available for European customers.
  Q9: Is the fan easy to install?

  A9: Yes, the heavy-duty design allows for installation in various industrial processing lines.
  Q10: What is the power range of the series?

  A10: The series includes models with power ranging from 3kW to 37kW